Whistler Radar Detector 1780 User Manual

1780 10/4/00 9:26 AM Page 1  
OWNER’S MANUAL  
1780  
LASER/RADAR DETECTOR  
THE WHISTLER GROUP  
CORPORATE HEADQUARTERS  
13016 N. Walton Blvd.  
Bentonville, AR 72712  
TEL (501) 273-6012 FX (501) 273-2927  
PRODUCT DEVELOPMENT CENTER  
25 Industrial Ave.  
Chelmsford, MA 01824  
TEL (978) 244-1400 FX (978) 244-1492  
CUSTOMER RETURN CENTER  
1201 N. Dixieland Rd.  
TM  
Rogers, AR 72756  
Consumer Relations Tel (800) 531-0004  
P/N 1780MAN, © WHISTLER 2000  
 
1780 10/4/00 9:26 AM Page 5  
TABLE OF CONTENTS  
WHISTLER FEATURES  
2
Topic  
Page  
Whistler 1780  
Model Features Summary....................................................3 - 5  
Installation .............................................................................6 - 8  
• Mounting Guidelines  
• Dash/Visor/Windshield Mounting  
• Power Connection And Fuse Replacement  
10  
3
Operation ............................................................................9 - 18  
• Power On And Self-Test  
• Integrated Real Voice™  
• Memory/Beep Confirmation  
• Audio Level Adjustment  
• Auto Quiet/Quiet Modes  
• City Mode  
1
7
4
5
9
8
• Dim/Dark Mode  
• Engaging/Disengaging VG-2 Detection  
• Stay Alert  
6
Option Select Mode  
Teach/Tutorial Mode  
Whistlers ergonomic and user-friendly design provides a  
new level of operating convenience. Special features  
include:  
• Memo Mode  
Vehicle Battery Saver Mode  
Radar, Laser And VG-2 Alerts ..........................................19 - 23  
• Radar Alerts  
1. Bracket Release Button – Provides quick and easy  
release of the mounting bracket.  
• Pulse Protection®  
• Safety Radar Audio/Visual Alerts  
Laser Audio/Visual Alerts  
VG-2 Audio/Visual Alerts  
• Alert Priority  
2. Power Jack – Provides connection for the power cord.  
3. Speaker – Provides distinct audio and Real Voice™  
warnings for X, K, Ka band radar, safety radar, laser and  
VG-2.  
• Reset Features  
• Care and Maintenance  
Troubleshooting Guide ............................................................24  
Are Detectors Legal? ...............................................................25  
Speed Monitoring Technologies .....................................26 - 27  
• Radar Facts  
4. Power/Dim/Dark/Play Button – Turns unit on/off and  
engages Dim/Dark modes (press and hold for 2 seconds).  
In Memo mode, starts/stops playing a recorded message.  
Laser Facts  
Other Speed Detection Systems  
• Radar Detector Detectors  
5. Volume Up/Down Buttons – Adjust volume up or  
Warranty Information........................................................28 - 30  
Specifications............................................................................31  
down. In Memo mode, selects one of nine messages.  
3
Accessories ...............................................................................32  
Accessory Order Form..............................................................33  
 
1780 10/4/00 9:26 AM Page 7  
WHISTLER FEATURES  
WHISTLER FEATURES  
6. High Visibility Display – Provides distinct visual confir-  
mation of signals detected, signal strength, and indicates  
engaged modes of operation.  
Accessories  
Accessories included are highly functional and easy to use.  
Power Cord - Connects to the units power jack and your  
7. Quiet/Menu/Record Button - Pressing QUIET before a  
signal is detected engages Auto Quiet Mode which auto-  
matically reduces the audio level after the initial warning to a  
low audio level setting. Pressing QUIET during a radar/laser  
encounter silences audio alerts, while allowing visual alerts to  
keep you informed. Pressing and holding for 2 seconds  
allows you to enter Option Select Mode (see page 14). In  
Memo mode, this button starts/stops recording.  
vehicles lighter socket.  
Windshield Bracket - Allows installation of unit on your  
vehicles windshield.  
Hook & Loop Fasteners - Designed to secure the unit on  
a level dashboard.  
8. CITY/CITY 1/CITY 2 Button - Reduces the annoyance  
of false alerts typically encountered in urban driving areas.  
9. Memo Button - Pressing Memo enters Memo Mode  
feature.  
10. Laser Antenna (Rear) - An integrated optical wave-  
guide provides superior detection of laser signals trans-  
13  
mitted from behind.  
12  
11  
11. Laser Antenna (Front) - High gain optical lens  
provides increased sensitivity and field of view for leading-  
edge laser detection.  
12. Radar Antenna - Compact, high-efficiency antenna  
receives radar signals.  
13. Mounting Bracket Location - Slot holds mounting  
bracket firmly.  
4
5
 
1780 10/4/00 9:26 AM Page 9  
INSTALLATION  
INSTALLATION  
Mounting Guidelines  
Mount the unit as low and level as possible near the center  
of the windshield.  
shield bracket. Press the bracket release button and remove  
the detector before bending.  
Do not mount your unit behind wipers, ornaments, mir-  
rored sunscreens, etc. These obstructions have metal sur-  
faces which can affect radar and laser signals and reduce crit-  
ical warning time. (Regular tinted glass does not affect recep-  
tion.)  
Some windshields have an Instaclearor Electriclear™  
type coating, which affect radar signals. Consult your dealer  
or the owners manual supplied with your vehicle to deter-  
mine if your windshield has this coating.  
Avoid placing unit in direct contact with windshield.  
To reduce the possibility of theft, conceal your unit when  
not in use.  
Dash Mounting  
Make sure the mounting location you have chosen is  
relatively level and is clean and dry. Clean with isopropyl  
alcohol if necessary to remove any waxes or polishes.  
Separate the fastener strips. Peel the paper backing off  
each strip and adhere one piece to the dash and the other  
piece to the bottom of the unit, taking care not to cover  
the serial number.  
Windshield Mounting  
Install the two suction cups and rubber bumper onto the  
bracket by fitting them into their holes.  
Press the suction cups onto the windshield at the location  
you have chosen. IMPORTANT: Some newer cars have a  
plastic safety coating on the inside of the windshield. The  
suction cups may leave permanent marks on this type of  
surface. To find out if your vehicle has this type of wind-  
shield, check the owners manual or ask your dealer. We  
recommend that you do not leave the suction cup bracket  
on the window in direct sunlight. If the detector is  
removed, this may cause blistering of the dash in some  
vehicles.  
Be careful not to place the fastener strip over the units serial number. If the  
fastener strip is removed, the serial number may be pulled off the unit. Units  
without serial numbers are not covered under warranty.  
Slide the detector onto the bracket until it locks into place.  
• If necessary, the unit may be leveled by bending the wind-  
6
7
 
1780 10/4/00 9:26 AM Page 11  
INSTALLATION  
OPERATION  
Visor Mounting (optional accessory)  
Power On And Self-Test  
• Slide the visor bracket into the bracket mounting slot.  
• Clip the visor bracket onto the visor making sure it is  
relatively level and has a clear view of the road.  
Each time your Whistler detector is turned on, an auto-  
matic self-test sequence confirms that the speaker and  
visual displays are functional.  
Slide on view  
• Press  
(Power) or apply Power. Display reads:  
WHISTLER  
Insert into bracket mounting slot. Do not bend this  
section of bracket.  
X
9
9
9
Power Connection  
• Plug the small end of the power cord into the units power  
jack.  
K
Ka  
• Plug the large end into the vehicles cigarette lighter.  
Fuse Replacement  
LASER  
The lighter socket plug is equipped with a replaceable 2  
amp 3AG fuse located behind the silver tip. To replace the  
fuse, carefully unscrew the tip of the plug. (IMPORTANT:  
Unscrew slowly. The tip contains a spring which may fly out  
when disassembling.) Insert the new fuse with the spring and  
screw on the tip. With use, screw cap on plug may loosen.  
Retighten occasionally.  
SR ON  
VG2 OFF  
B SVR ON  
HIGHWAY  
Integrated Real Voice  
When selected, Real Voice will be used to articulate the  
following:  
1. Band Identification  
2. Safety Warning System messages  
NOTE: In certain cases the voice message does not repli-  
cate the text message.  
Unscrew the tip of the lighter socket plug carefully when replacing the 2 amp  
fuse.  
3. Feature Selection  
8
9
 
1780 10/4/00 9:26 AM Page 13  
OPERATION  
OPERATION  
Memory/Beep Confirmation  
Auto Quiet Mode  
All features selected (except Stay Alert and Quiet) are  
retained in memory. Each time a button is pressed one  
beep confirms feature “on”, two beeps confirm feature  
“off”.  
Auto Quiet reduces the selected audio level to level (1)  
approximately 5 seconds after a radar or safety radar sig-  
nal is detected. The alert for any new signal within 20 sec-  
onds will resume at level (1). Auto Quiet does not affect  
VG-2 or laser alerts.  
Audio Level Adjustment  
The audio levels can be adjusted high to low, or low to  
high, in nine steps: (0) is no audio level, (8) the highest.  
• Press Quiet/Menu (before a signal is detected) to  
engage Auto Quiet. Display reads:  
• Press Volume  
up to increase audio level.  
AUTO  
• Press Volume down to decrease audio level.  
As audio level is adjusted, beeps are provided and the dis-  
play indicates volume level. Example:  
QUIET  
Once the Auto Quiet mode is engaged, you may cancel  
the audio alarm by pressing Quiet.  
• Press Quiet (when the unit is not alarming) to cancel  
Auto Quiet mode.  
VOL O  
No Audio Level  
8
VOL  
Highest Level 8  
Quiet Mode  
Quiet cancels audio during an alert and any new alert with-  
in 20 seconds. After 20 seconds, approximately 2 beeps  
are provided on any new alert and unit then remains quiet.  
• Press Quiet to cancel the audio.  
• Press Quiet a second time during an alert to restore the  
standard audio alert pattern; or turn the unit off, then on.  
10  
11  
 
1780 10/4/00 9:26 AM Page 15  
OPERATION  
OPERATION  
City/City 1/City 2 Mode  
Dim/Dark Mode  
Dim/Dark Mode reduces the illumination of the display.  
• Press and hold (Power) for 2 seconds to reduce illumi-  
Whistlers Three Stage City Mode is designed to reduce the  
annoyance of automatic door openers, intrusion alarms and  
other devices which share frequencies with police radar.  
• Press City to engage City. Display reads:  
nation to a Dim setting. Display reads:  
DIM  
CITY  
• Pressing City a second time engages City 1. Display reads:  
• Pressing and holding  
for 2 seconds a second time  
engages Dark Mode. Display reads:  
CITY 1  
• Pressing City a third time engages City 2. Display reads:  
DARK  
CITY 2  
Dim or dark can be engaged during an alert. In Dark Mode,  
the display goes dark for as long as a signal is being detect-  
ed and for 20 seconds after, then the display returns to the  
dimmer setting.  
• Pressing City a fourth time cancels City, City 1, and City 2.  
Display reads:  
HIGHWAY  
• Pressing and holding  
tion to the display.  
a third time restores full illumina-  
In City Mode, weak speed/safety radar signals give an initial  
alarm of two beeps, and then remains quiet unless the signal  
becomes very strong. When the signal strength increases,  
two additional beeps are provided. In City 1 Mode, only the  
X band sensitivity is lowered. In City 2 Mode, X-band is not  
detected. CAUTION: When selecting this mode, some  
towns/small cities may still be using X band radar.  
Engaging/Disengaging VG-2  
See option select mode to turn this feature on.  
If Auto Quiet is engaged in City 1 or City 2 modes and the  
unit receives a strong radar signal, the unit performs the Auto  
Quiet feature. City Modes do not change the audio alert for  
laser or VG-2.  
12  
13  
 
1780 10/4/00 9:26 AM Page 17  
OPERATION  
OPERATION  
Option Select Mode  
Stay Alert Feature  
Entering Option Select Mode allows you to customize  
options such as Tone Select, Real Voice, Abbreviated  
Power Up Sequence and VG-2 Mode. When selecting  
The Stay Alert Feature is designed to test a drivers alert-  
ness. To engage (when unit is not alarming):  
• Press and hold City for approximately 2 seconds.  
Release the button during or immediately following the  
alert given. Display reads:  
options, the  
,
or must be pressed within 20 seconds  
or options mode will automatically be exited. To enter:  
Press  
(Quiet)  
:
*Display  
TONE 3  
To Change, Option:  
RUALERT  
Reads:  
Press  
Within 30-60 seconds two beeps are sounded; to show alert-  
For 2 seconds  
or  
Tone 1, 2, or 3  
(3 different X, K, Ka  
patterns)  
ness, the driver must press either the  
(Quiet) button within 3-5 seconds. If the button is pressed  
within 3-5 seconds, the cycle is repeated.  
(Volume), City or  
2nd time  
TEST YES  
VG2 OFF  
= YES  
= NO  
X, K, Ka Audio tones  
1 beep during  
Power Up  
If a button was not pressed within 3-5 seconds alarm sounds  
and the display reads:  
GETREST  
3rd time  
4th time  
= ON  
Turns VG-2 On  
• Press  
(Power) to exit.  
= OFF Turns VG-2 Off  
WARNING!!! Stay Alert is NOT intended as a substitute for  
adequate rest. You should NOT operate a vehicle if you are  
drowsy. During extended periods of vehicle operation, you  
should take frequent breaks. Improper reliance on the Stay  
Alert feature may result in vehicle damage, personal injury or  
death. NEVER OPERATE A VEHICLE IF YOU ARE DROWSY.  
SAFETY  
ON  
= ON  
Turns Safety Radar On  
= OFF Turns Safety Radar Off  
5th time  
VOICE  
ON  
= ON  
Real Voice engaged  
= OFF Real Voice disengaged  
= ON Battery Saver On  
= OFF Battery Saver Off  
6th time  
B SVR  
*Factory settings.  
Press  
anytime to exit.  
14  
15  
 
1780 10/4/00 9:26 AM Page 19  
OPERATION  
OPERATION  
Teach/Tutorial Mode  
Provides simulated alerts for each type of signal.  
• Press City and  
Display reads:  
• Press and release the  
a recording. Note: Recording starts as soon as the button  
is released. Display reads:  
(Quiet/Record) button to begin  
(Quiet) simultaneously and release.  
TEACH  
REC1 8  
REC = record, 1 = track #, 8 = time remaining  
Quiet mode can also be accessed while Teach/Tutorial  
mode is engaged.  
If the recording time expires for a track, the unit will auto-  
matically switch to the next track. Press and release  
(Quiet/Record) again to stop recording. The unit will  
automatically stop recording once track 9 is completed.  
• Press  
(Power/Play) to exit.  
Memo Mode  
Record up to nine distinct message tracks for a total of 90  
seconds, one 90 second message or any combination in  
between.  
IMPORTANT: Unit does not detect radar or laser signals  
during recording or while playing a memo.  
WARNING!!! Memo mode is not intended to be used  
while you are driving. You should not use any device in a  
vehicle that may distract you from observing the road  
ahead.  
To play a message:  
• Enter Memo mode and press  
recorded messages.  
(Power/Play) to listen to  
To play a selected track, press (Volume Up) or  
(Volume Down) button until selected track appears on  
the display. Display reads:  
PLY1 8  
To record or play a message (Memo mode):  
• Press memo button and release. The unit will beep once;  
this enters Memo mode. Display reads:  
PLY = play, 1 = track #, 8 = time remaining  
• Press the  
(Power/Play) button.  
Messages are kept in memory and are not affected by  
resetting the factory features. See “Reset Features” sec-  
tion of the manual.  
PLAY  
To delete a message:  
Enter Memo mode and press  
(Volume Down) button until selected track appears on  
(Volume Up) or  
RECORD  
the display.  
• Press the  
(Quiet/Record) button twice.  
MEMO  
16  
17  
 
1780 10/4/00 9:26 AM Page 21  
OPERATION  
RADAR ALERTS  
Speed Radar Audio/Visual Alerts  
To exit Memo mode:  
When X, K or Ka is detected the band ID and signal  
strength is displayed. The audio alert is continuous and  
has a geiger counter-like pattern. The faster the beep the  
closer or stronger the radar source. Example:  
• Press memo button and release. The unit will beep twice.  
NOTE: Memo mode automatically exits within 20 seconds  
if a button is not pressed.  
Ka Band  
Detected  
Vehicle Battery Saver Mode  
The Vehicle Battery Saver Mode automatically shuts off  
your detector within 3 hours if you forget to turn it off. The  
timer is reset if the detector is turned off, unplugged or  
any button is pressed before the 3 hours have expired. The  
detector will alert you with an audible and visual warning  
before it shuts off. Display reads:  
Display  
Digits  
ramp  
1-9  
Ka  
9
1 = weak signal, 9 = strong signal  
Pulse Protection®  
When a pulse type signal (instant on strong signal) is  
detected an urgent 3 second audio warning is sounded  
and the display reads:  
PWR OFF  
During this warning you can momentarily reset the unit by  
pressing any button. This will reset the timer.  
If the unit has automatically turned itself off, press the  
(Power/Play) button to turn the unit back on. You can  
manually engage the Vehicle Battery Saver Mode by press-  
ing and holding the City button until one beep is heard.  
PULSE  
After 3 seconds standard alert pattern continues.  
Refer to “Option Select Mode” for instructions for deacti-  
vating battery saver mode feature.  
18  
19  
 
1780 10/4/00 9:26 AM Page 23  
SAFETY RADAR ALERTS  
LASER/VG-2 ALERTS  
Laser Audio/Visual Alerts  
In communities where transmitters are located, the Safety  
Warning System displays over 60 text messages. When  
Safety Radar is detected the audio alert is geiger counter-  
like.  
When a laser signal is detected the word Laser” and sig-  
nal strength is displayed, the audio alert is continuous for  
a minimum of 3 seconds. Example:  
LASER  
The more |||” the closer the laser source.  
Safety Warning System Text  
Example: Poor Road Surface:  
VG-2 Audio/Visual Alerts  
Note: You must turn this feature on in option select mode before  
it will detect VG-2.  
When a VG-2 signal is detected, the detector “hides” its own  
radiated signal and becomes undetectable by the VG-2.  
CAUTION  
POOR  
VG2 VG2  
Text message confirms detection of VG-2.  
ROAD  
Every 30 seconds, the detector checks for a VG-2 signal. If  
a VG-2 signal is still present, the unit continues to hide and  
repeats the VG-2 alert. If no signal is detected, two beeps  
are provided, indicating an “all clear” condition. During  
VG-2 Alert X, K, and Ka band signals cannot be received.  
(Reference page 27 for VG-2 information.)  
SURFACE  
Note: Not all areas have Safety Warning System transmitters.  
Alert Priority  
When two or more signals are received at the same time,  
the alert priority is:  
1. Laser  
2. VG-2  
3. Speed Radar  
4. Safety Radar  
Example:  
If X band is alerting, then suddenly VG-2 is detected, the  
VG-2 warning will override the X band alert.  
20  
21  
 
1780 10/4/00 9:26 AM Page 25  
RESET FEATURES  
CARE & MAINTENANCE  
Care And Maintenance  
Reset Features  
During the summer months, avoid prolonged exposure to  
direct sunlight by removing your unit from the dash when  
your vehicle is parked for an extended period of time.  
Do not spray water, cleaners or polishes directly onto the  
unit. The spray may penetrate through the openings and  
damage the unit. Also, do not use any abrasive cleaners on  
the units exterior.  
All user features can be reset to factory settings.  
• Unplug Power Cord from unit.  
• Press and hold  
(Power) and  
(Quiet).  
• Plug Power Cord into unit.  
• Wait for 2 beeps.  
• Release  
and . Unit is now reset.  
1. Audio to level (4).  
2. Display reads Highway.  
3. Dim/Dark Mode to full illumination of display.  
4. Auto Quiet Mode OFF.  
5. VG-2 Detection Mode OFF.  
6. Voice ON.  
7. Safety ON.  
8. Vehicle Battery Saver ON.  
9. Full Power Up sequence.  
10. Default TONE 3.  
11. Unit ON or OFF.  
NOTE: Reset feature procedure does not erase messages  
in Memo mode.  
22  
23  
 
1780 10/4/00 9:26 AM Page 27  
TROUBLESHOOTING GUIDE  
ARE DETECTORS LEGAL?  
In Most States YES!  
Your Whistler detector is expertly engineered and designed  
to exacting quality standards to provide you with reliable,  
trouble-free operation. If your unit has been correctly installed  
following the guidelines in this manual, but is not operating  
optimally, please refer to the troubleshooting guide below.  
Laser detectors are completely legal in every state when  
used in automobiles or light trucks (under 10,000 lbs.).  
Similarly, when used in automobiles or light trucks, radar  
detectors are legal in almost every state. Exceptions are  
Virginia and Washington, D.C., which have local regulations  
restricting the use of radar receivers in any vehicle.  
PROBLEM: No display or audio.  
Check fuse in Whistler plug; replace if necessary with a  
2 amp 3AG type.  
Concerning trucks over 10,000 lbs., the Federal Highway  
Administration (FHwA) issued  
Check fuse for lighter socket; replace if necessary.  
Make sure lighter socket is clean.  
a
regulation, effective  
January, 1994 which prohibits radar and laser detector use  
in these types of vehicles nationally.  
Prior to the FHwA regulation, laws existed in the state of  
New York restricting the use of radar detectors in trucks  
over 18,000 lbs. and in Illinois in trucks over 26,000 lbs.  
PROBLEM: Unit alarms when vehicle hits bumps.  
Check for loose lighter socket; tighten and clean.  
Check connections at both ends of power cord. Substitute  
another cord to determine if cord is defective. Return  
defective cord to the factory.  
PROBLEM: Unit alarms when using vehicle equipment, electrical  
accessories (brakes, power mirrors/windows, directionals, horn,  
etc.), or when accelerating.  
Vehicles electrical system, including battery and alternator,  
may have electrical noise. Install a filter capacitor (470mfd.  
25 volt or larger capacitance value) on the back of the  
lighter socket.  
PROBLEM: Audio alerts are not loud enough.  
Cancel Auto Quiet Mode or City Mode.  
Check audio level setting (see page 10 & 11).  
PROBLEM: No X band signals.  
Cancel City 2.  
PROBLEM: Unit gives laser alert when accelerating.  
Possible bad or low quality distributor cap. Replace with high qual-  
ity cap.  
If difficulties occur which cannot be solved by information in  
this Troubleshooting Guide, please call Whistler Consumer  
Relations at 1-800-531-0004 before returning your unit for  
service.  
24  
25  
 
1780 10/4/00 9:26 AM Page 29  
SPEED MONITORING TECHNOLOGIES  
SPEED MONITORING TECHNOLOGIES  
Radar Facts  
Other Speed Detection Systems  
A radar gun operates by transmitting radio waves at certain  
frequencies which reflect off objects and are then picked up  
by the radar guns receiving section. When a radar beam  
reflects off a moving target, a measurable frequency shift  
occurs. The radar unit converts this shift into miles per hour  
to determine your vehicles speed.  
Currently, the FCC (Federal Communications Commission)  
permits operation of traffic radar guns at X Band (10.500 -  
10.550 GHz), K Band (24.050 - 24.250 GHz), and Ka Band  
(33.400 - 36.000 GHz).  
Several techniques other than radar or laser are used to  
measure vehicle speeds. When these methods are being  
used, no detector can provide a warning. These techniques  
include:  
• Pacing - A patrol car drives behind you and matches your  
driving speed.  
Vascar/Aircraft - The time it takes a vehicle to travel a  
known distance is measured.  
Radar Detector Detectors (VG-2)  
The Interceptor VG-2, or simply VG-2, is a microwave receiv-  
er used by police to detect signals radiated by the local oscil-  
lator of a radar detector. Because its purpose is to identify  
persons driving with radar detectors, the VG-2 is known as a  
“radar detector detector”.  
The VG-2 is the primary tool used by the police to identify  
radar detector equipped vehicles. If caught, in a state where  
detectors are illegal, (see page 25), drivers risk losing their  
radar detector and receiving a fine. In addition, instant-on  
radar is almost always used in combination with a VG-2, leav-  
ing unsuspecting motorists vulnerable to receiving two tick-  
ets — one potentially for speeding, the other for possession  
of a detector.  
Laser Facts  
Its well documented that many radar guns cannot reliably  
provide the speed of a targeted vehicle that is traveling in a  
group of vehicles. In contrast, a laser gun can target a spe-  
cific vehicle out of a line of traffic and determine its speed.  
The advantage of laser over radar in terms of target identifi-  
cation is the result of the laser guns narrow beam. A radar  
transmission can cover more than a four-lane highway at a  
distance of 1,000 feet, compared with a laser transmission  
which covers about 6 feet at the same distance.  
For best protection, keep these points in mind:  
Because your vehicles license plate or headlights are the laser guns  
primary targets, mounting your Whistler detector on the dashboard can  
improve laser detection at short range.  
Do not follow closely behind any vehicle you cannot see through. If you  
cant see past a vehicle ahead of you, chances are your detector wont  
either.  
Having a radar detector capable of detecting the VG-2 may  
alert you to the presence of a speed trap.  
The receiving range of your laser detector will not be the same as a radar  
detector. Laser guns are most often used at short range.  
26  
27  
 
1780 10/4/00 9:26 AM Page 31  
WARRANTY INFORMATION  
WARRANTY INFORMATION  
Consumer Warranty  
IMPORTANT: Whistler will not assume responsibility for loss or  
damage incurred in shipping. Therefore, please ship your unit  
insured with return receipt requested.  
The 1780 Whistler detector is warranted to the original  
purchaser for a period of one year from the date of original  
purchase against all defects in materials and workmanship.  
This limited warranty is void if the unit is abused, modi-  
fied, installed improperly, if the housing has been  
removed, or if the serial number is missing. There are no  
express warranties covering this product other than those set  
forth in this warranty. All express or implied warranties for this  
product are limited to one year. Whistler is not liable for  
damages arising from the use, misuse, or operation of this  
product.  
2. Include with your unit the following information, clearly printed:  
Your name and street address (for shipping via UPS), and  
a daytime telephone number. (No P.O. Box please.)  
• A detailed description of the problem (e.g., “Unit per  
forms self-test but does not respond to radar”).  
• A copy of your dated proof of purchase or bill of sale.  
3. Be certain your unit is returned with its serial number. For  
reference, please write your units serial number in the following  
space: s/n __________________.  
Service Under Warranty  
During the warranty period, defective units will be repaired or  
replaced (with the same or a comparable model), at Whistlers  
option, without charge to the purchaser when returned pre-  
paid, with dated proof of purchase to the address below. Units  
returned without dated proof of purchase will be handled as  
described in section “Service Out Of Warranty.” Due to the  
specialized equipment necessary for testing a radar/laser  
receiver, there are no authorized service stations for Whistler  
brand detectors other than the factory.  
Units without serial numbers are not covered under warranty.  
IMPORTANT: To validate that your unit is within the warranty  
period, make sure you keep a copy of your dated proof of  
purchase and return the Warranty Validation card.  
When returning a unit for service under warranty, please  
follow these instructions:  
1. Ship the unit in the original carton or in a suitable sturdy  
equivalent, fully insured, with return receipt requested, and  
shipping charges prepaid to:  
Whistler Repair Dept.  
1201 North Dixieland Rd.  
Rogers, AR. 72756  
28  
29  
 
1780 10/4/00 9:26 AM Page 33  
WARRANTY INFORMATION  
SPECIFICATIONS  
• Dimensions: 1.6"H x 2.9"W x 4.5"L  
• Weight: 7.5 oz.  
Service Out Of Warranty  
Units will be repaired at “out of warranty” service rates  
when:  
• The units original warranty has expired.  
• Dated proof of purchase is not supplied.  
Laser Wavelength:  
905 ± 50 nanometers (nm)  
• The unit has been returned without its serial number.  
• The unit has been abused, modified, installed improper-  
ly, or had its housing removed.  
• Radar Frequencies:  
10.500 - 10.550 GHz (X Band)  
24.050 - 24.250 GHz (K Band )  
33.400 - 36.000 GHz (Ka Superwideband)  
The minimum out of warranty service fee for your Whistler  
detector is $55.00 (U.S.). If you require out of warranty serv-  
ice, please return your unit as outlined in the section  
“Service Under Warranty” along with a certified check or  
money order for $55.00. Payment may also be made by  
MasterCard or VISA; personal checks are not accepted. In  
the event repairs cannot be covered by the minimum  
$55.00 service fee, you will be contacted by a Whistler  
technical service specialist who will outline options avail-  
able to you. If you elect not to have your unit  
repaired/replaced, it will be returned to you along with  
your certified check or money order.  
Operating Temperature Range:  
-20˚ C to +80˚ C (-4˚ F to +176˚ F)  
• Power Requirements:  
Operational 12 to 15 volts DC, 250mA nominal  
Vehicle Battery Saver, 70mA nominal.  
One or more U.S. patents apply: #4,315,261; #5,146,227;  
#5,379,456; #5,666,120, and #5,990,821.  
IMPORTANT: When returning your unit for service, be cer-  
tain to include a daytime telephone number.  
Specifications are subject to change without notice.  
Consumer Relations  
If you have questions concerning the operation of your  
Whistler detector, or require service during or after the  
warranty period, please call Consumer Relations at  
1-800-531-0004. Representatives are available to answer  
your questions Monday - Friday from 8:00 a.m. to 5:00 p.m.  
(CST).  
30  
31  
 
1780 10/4/00 9:26 AM Page 35  
ACCESSORIES  
ACCESSORY ORDER FORM  
The following accessories can be ordered directly from  
Whistler by calling 1-800-531-0004, or by mailing in the  
form on page 33..  
PLEASE SHIP TO:  
Name______________________________________________  
Street______________________________________________  
City________________________State_______Zip_________  
Telephone Number (______) __________________________  
Order  
Code  
Description  
Price  
Order Code/Description Quantity Total Price  
$
202138  
202140  
206294  
Visor Bracket  
$ 6.95  
$ 9.95  
$ 7.95  
Windshield Bracket Kit  
*Modular Lighter Plug  
(Requires 206550 or  
206551)  
206550  
206551  
*Modular Straight  
Power Cord (5')  
(Requires 206294)  
*Modular Coiled  
$ 6.95  
$ 7.95  
Subtotal  
Sales Tax (if Applicable)  
Shipping and Handling*  
Total Enclosed  
$
$
5.00  
Power Cord (7')  
(Requires 206294)  
Straight Power Cord (5)  
Coiled Power Cord (7)  
Hook & Loop  
Hardwire Kit (10' )  
(for wiring to fuse box)  
206552  
206553  
206879  
206880  
$ 14.95  
$ 15.95  
$ 1.95  
$ 9.95  
SEND ORDER FORM WITH CERTIFIED CHECK OR  
MONEY ORDER TO:  
Whistler CTS  
PO Box 1844  
Bentonville, AR 72712  
IF PAYING BY MASTERCARD OR VISA PLEASE PROVIDE:  
Type of card ___MasterCard ___Visa ___American Express  
Name on Card______________________________________  
Card Number_______________________________________  
Expiration Date_____________________________________  
Cardholder Signature________________________________  
*For expedited shipping costs, contact Whistler Customer Service, 1-800-531-0004  
*Modular: interconnecting pieces cord and plug.  
Shipping and handling (per order) $5.00  
Prices are subject to change without notice.  
32  
33  
 

Weider Home Gym 831159833 User Manual
Weslo Table Top Game WLTL299110 User Manual
Western Telematic Network Card Data FaxModem User Manual
Westinghouse Saw Digtrip RMS 500 User Manual
Whirlpool Cooktop GJC3054RB02 User Manual
Windsor Vacuum Cleaner IM 10066360 User Manual
Woodstock Electric Pet Fence W2005 User Manual
Yamaha Stereo Amplifier DSP AX620 User Manual
Zanussi Washer DL4 User Manual
Zanussi Washer ZWN 1220 W User Manual