Whistler Radar Detector XTR 475 User Manual

Model Features Summary ................................. 3-5  
Installation ........................................................ 5 - 6  
OWNER’S MANUAL  
• Mounting Guidelines  
5 - 6  
6
• Windshield Mounting  
• Power Connection and Fuse Replacement  
6
Operation ....................................................... 7 - 13  
Dear Whistler Owner,  
Power On Self Test & Volume  
7
• Dim/Dark Mode  
• Setting Saver  
7
7
If you have questions concerning the oper-  
ation of this Whistler product please  
call:  
• Feature Engaged Confirmation  
7
XTR-  
®
(N/A on XTR-575)  
• Integrated Real Voice  
8
• Quiet/Auto Quiet Mode  
• Audio Level Adjustment  
• Self Test Mute  
8
475/500/550/  
575/580/590  
Total Band Protection™  
LASER-RADAR  
8
8
• City/City 1/ City 2 Mode  
• Highway Mode  
9
9
CuSTOmer SeRVICE  
Teach/Tutorial Mode  
9
1-800-531-0004  
Monday - Friday • 8:00 am - 5:00 pm CT  
or visit our website  
• Compass Calibration (N/A on XTR-500/550)  
• Twin Alert Periscope  
10  
11  
• VG-2 Mode  
11  
Vehicle Battery Saver Mode  
• Filter Mode (N/A on XTR-500/550)  
11  
12  
®
• Intellicord Ready (XTR-575/580/590)  
12  
DETECTOR  
www.whistlergroup.com  
• Option Select Mode  
• Stay Alert Feature  
12 - 14  
15  
Please keep the receipt in a safe place.  
You may register your product online  
at www.whistlergroup.com. For warranty  
verification purposes, a copy of your dated  
store receipt must still accompany any unit  
sent in for warranty work. If the unit is  
returned without a dated store receipt, an  
out of warranty service charge applies.  
Note: Your warranty period begins at  
the time of purchase. The warranty is  
validated only by the dated store  
receipt!  
Safety Warning System..................................... 15  
POPMode Alerts .............................................. 16  
Laser/Radar Alerts .............................................. 16  
The Whistler Group Corporate Headquarters  
13016 N. Walton Blvd. • Bentonville, AR 72712  
Tel 479.273.6012 • Fax 479.273.2927  
• Speed Radar Audio/Visual Alerts  
16  
16  
16  
• Laser Audio/Visual Alerts  
®
• Pulse Protection  
VG-2 Alerts ......................................................... 17  
Customer Return Center  
• Alert Priority  
17  
551 N. 13th St. • Rogers, AR 72756  
Reset Features .................................................... 17  
Troubleshooting Guide ....................................... 18  
Care and Maintenance ........................................ 19  
Are Detectors Legal? .......................................... 19  
FCC Information .................................................. 20  
Speed Monitoring ......................................... 20 - 23  
Customer Service Tel 800.531.0004  
www.whistlergroup.com  
P/N 260012, REV1  
©
2008 The Whistler Group, Inc.  
• Radar Facts  
20  
21  
21-22  
22  
22 - 23  
• POP Mode  
• Laser Facts  
• Other Speed Detection Systems  
• Radar Detector Detectors  
Warranty Information .................................... 23-26  
Specifications ......................................................26  
Accessories ......................................................... 27  
 
INSTALLATION  
OPERATION  
OPERATION  
When selected, Real Voice® will be used to articulate the  
following:  
®
Windshield Mounting  
Integrated Real Voice (N/A on XTR-575)  
Power On Self Test  
• Install the two suction cups and rubber bumper  
onto the bracket by fitting them into their holes.  
• Press the suction cups onto the windshield at the  
location you have chosen.  
Each time your Whistler detector is turned on,  
an automatic self-test sequence confirms that  
the speaker and visual displays are functional.  
Text Display shows in order: (N/A on XTR-475)  
1. WHISTLER 2. X-band 3. K-band 4. Ka-band  
5. LASER 6. SR OFF 7. VG2 OFF 8. POP ON  
9. B SVR ON 10. FILTER (XTR-575/580/590)  
1. Band Identification  
2. Safety Warning System messages  
3. Feature Selection  
Note: In certain cases the voice message does not repli-  
cate the text message.  
Important: Some newer cars have a plastic safety  
coating on the inside of the windshield. The wind-  
shield bracket may leave permanent marks on this  
type of surface. To find out if your vehicle has this  
type of windshield, check the owners manual or ask  
your dealer. We recommend that you do not leave  
the suction cup bracket on the window in direct sun-  
light. If the detector is removed, this may cause  
blistering of the dash in some vehicles.  
• Slide the detector onto the bracket until it locks into  
place.  
11. HIGHWAY 11a. COMBO (XTR-575/580/590)  
Quiet Mode  
Quiet cancels audio during an alert and any new alert  
within 20 seconds. After 20 seconds, approximately 2  
beeps are provided on any new alert and unit then  
remains quiet.  
Dim/Dark Mode  
Dim/Dark Mode reduces the illumination of the  
display.  
• Press Quiet to cancel the audio.  
Press the Dark button to reduce illumination  
to a Dim setting.  
• Press Quiet a second time during an alert to restore  
the standard audio alert pattern; or turn the unit off,  
then on.  
Pressing the Dark button a second time  
engages Dark Mode. The display illumination  
is further reduced.  
• If necessary, the unit may be leveled by bending the  
windshield bracket. Press the bracket release button  
and remove the detector before bending.  
Auto Quiet Mode  
Auto Quiet reduces the selected audio level to level (1)  
approximately 5 seconds after a radar or safety radar  
signal is detected. The alert for any new signal within 20  
seconds will resume at level (1). Auto Quiet does not  
affect laser alerts.  
Dim or Dark Mode can be engaged during an  
alert. In Dark Mode, the display goes dark for as  
long as a signal is being detected and for 20  
seconds after, then the display returns to the  
dimmer setting.  
Power Cord Connection  
• Plug the small end of the power cord into the  
units power jack.  
Press Quiet (before a signal is detected) to engage  
Auto Quiet.  
• Plug the large end into the vehicles cigarette lighter.  
• Once the Auto Quiet mode is engaged, you may  
cancel the audio alarm by pressing Quiet.  
• Press Quiet (when the unit is not alarming) to  
cancel Auto Quiet mode.  
Pressing the Dark button a third time restores  
full illumination to the display.  
Note: Cord fits tightly into detector. When  
installing the cord, expect some resistance.  
Setting Saver  
Fuse Replacement  
Setting Saver saves your personalized settings  
so that when the detector is turned off and then  
on again, you do not have to re-enter them.  
The lighter socket plug is equipped with a  
replaceable 2 amp 3AG fuse located behind the  
silver tip. To replace the fuse, carefully unscrew  
the tip of the plug.  
Audio Level Adjustment  
The audio levels can be adjusted high to low or low to high.  
• Move Power/Volume button back to increase audio level.  
• Move Power/Volume button forward to decrease  
audio level. As audio level is adjusted, beeps are  
provided and the display indicates volume level.  
Feature Engaged Confirmation  
Each time a button is pressed, one beep confirms  
feature “on”, two beeps confirm feature “off”.  
Important: Unscrew slowly. The tip contains a  
spring which may fly out when disassembling.  
Insert the new fuse with the spring and screw on  
the tip. With use, screw cap on plug may loosen.  
Retighten occasionally.  
Self-test Mute (XTR-475 only)  
Simply press the Quiet button during the self-test  
sequence to cancel the self-test audio. This will not  
effect radar/laser alerts. To restore the self-test audio,  
simply press the Quiet button during the next self-test.  
6
7
8
 
OPERATION  
OPERATION  
OPERATION  
City/City 1/City 2 Mode  
Compass Calibration (N/A on XTR-500/550)  
The unit will need to be calibrated in order for the  
compass to provide accurate readings. To calibrate  
the unit, perform the following procedure:  
Twin Alert Periscope  
Whistlers Three Stage City Mode is designed to  
reduce the annoyance of automatic door open-  
ers, intrusion alarms and other devices which share fre-  
quencies with police radar. Generally, X band is  
used for these devices.  
Whistlers new Twin Alert Periscope provides an  
added attention getting visual alert. The two extra  
LEDs flash on and off when the unit alarms to pro-  
vide a unique visual alert. This alert can be pro-  
grammed, through the Option Select Mode to: 1.  
flash for all alarms, 2. remain on, or 3. turn LEDs off  
completely.  
1. Mount the unit level in the center of the  
vehicles windshield. Make sure there are no other  
magnetic sources near the detector (i.e., speaker).  
2. Select a large clear area (parking lot or field)  
without any power lines.  
• Press City button to cancel Highway Mode  
and engage City Mode.  
• Press City button again to enter City 1 Mode  
• Press City button again to enter City 2 Mode  
• Pressing City button a fourth time cancels City 2  
Mode and returns the unit to Highway Mode.  
VG-2 Mode  
XTR-475  
See Option Select Mode to turn this feature  
on/off. When a VG-2 signal is detected, the VG-2  
is sounded and the display flashes “VG-2”. After  
3 seconds the audio is canceled and the display  
no longer flashes. This cycle is repeated if the  
VG-2 signal is again detected.  
3. Press the Menu button to enter Calibration Mode..  
While parked, press both Dark and Quiet buttons simultane-  
ously until the compass headings start to rotate.  
In City Mode, weak speed/safety radar signals  
give an initial alarm of two beeps, and then  
remains quiet unless the signal becomes very  
strong. When the signal strength increases, two  
additional beeps are provided. City 1 and City 2  
Modes operate the same as Highway Mode, but  
in City 1 Mode, only the X band sensitivity is low-  
ered. In City 2 Mode, X-band is not detected.  
4. Drive vehicle slowly in two complete circles, in either direc-  
tion. If calibration does not automatically finish press Dark and  
Quiet buttons again to complete calibration. The unit will beep  
twice and show current compass heading.  
During the period a VG-2 signal is detected, a  
radar signal cannot be detected. However,  
because the VG-2 alert has confirmed that a  
patrol car is nearby, you are already aware of the  
potential for speed monitoring and can adjust  
your speed accordingly. Laser detection is not  
affected while a VG-2 signal is detected. (See  
page 17 for more information)  
Note: XTR-475 shows only the compass heading  
while in highway mode.  
Caution: Some towns/small cities may still be  
using X band radar. City Modes do not change  
the audio alert for laser or VG-2.  
XTR-575//580/590  
3. Press the Menu button until display shows  
CAL MODDE. Then press the Dark and Quiet buttons  
simultaneously. The display shows (scrolling):  
Highway Mode  
Vehicle Battery Saver Mode  
Highway mode provides full audio warnings any  
time radar (X, K, Ka, Safety Radar) or laser sig-  
nals are detected, and is recommended for open  
road driving.  
The Vehicle Battery Saver Mode automatically shuts  
off your detector after 3 hrs. (6 hrs. for XTR-475) The  
timer is reset if the detector is turned off,  
unplugged or any button is pressed before the  
timer has expired. The detector will alert you with  
an audible and visual warning before it shuts off.  
During this warning, you can momentarily reset the  
timer by pressing any button. If the unit has auto-  
matically turned itself off, press any button to turn the  
unit back on.  
4. If calibration does not automatically finish press the  
Dark and Quiet buttons simultaneously to complete cali-  
bration. The unit will beep twice and display shows,  
for example:  
For more information on City and Highway modes,  
please visit our F.A.Q. page on our website:  
www.whistlergroup.com  
Note: In Combo Mode an “H” or “CC” will be shown  
to indicate mode of operation.  
Teach/Tutorial Mode  
Provides simulated alerts for each type of signal.  
• Press City and Quiet buttons simultaneously  
Important: If unit mounting is relocated in the vehi-  
cle, (i.e., visor to windshield mounting or dash  
mounting), or if the unit is moved to another vehi-  
cle, you must recalibrate the compass.  
Refer to “Option Select Mode” for instructions  
for deactivating battery saver mode feature.  
• Display Shows:  
(All but XTR-475)  
• Press Dark button to exit.  
9
10  
11  
 
OPERATION  
OPERATION  
OPERATION  
Option Select for Model XTR-575/580/590  
Filter Mode (N/A on XTR-500/550)  
Option Select Mode (Continued)  
There are times when a radar detector can emit  
the same frequency as police radar and can  
cause your detector to falsely alarm. Sometimes  
a detector can display a signal when picking up  
another radar detector in vehicle close by. The  
Whistler Filter Mode options provide a method  
to study the signal which will verify if the signal  
is a legitimate police radar or a false alert from  
another detector. Two options exist:  
To enter:  
Option Select for Model XTR-475  
Filter: Allows for normal filtering.  
Filter 1: Provides and extra step to analyze the  
legitimacy of the signal.  
Filter is the factory default and should provide  
adequate filtering for most conditions. If you  
experience excessive alerts due to radar detec-  
tors in other vehicles, try the Filter 1 option.  
Filter Mode does not override Highway or City  
settings. See Option Select Mode to change  
Filter settings.  
Note: Option Select Mode band and filter on/off on the  
XTR-475 is shown with the first bar “I” on the alert display.  
Press and hold Power button to exit Option Select Mode.  
Option Select for Model XTR-500/550  
Intellicord® Ready (N/A on XTR-500/550)  
Using Whistlers optional Intellicord® Power Cable  
allows some models to control the detectors fea-  
tures such as Power On/Off, City Modes,  
Dim/Dark, and Quiet/Auto Quiet with a simple  
press of the button on the Power Cable. Two fea-  
tures can be controlled: one by a short press of  
the button, and the second by a long press of the  
button. Option Mode allows the user to program  
the feature assignments.  
Option Select Mode  
Press and hold Power button to exit Option Select Mode.  
Entering Option Select Mode allows you to customize  
options such as Tone Select, Abbreviated Power Up  
Sequence and VG-2 Mode. Press the Menu button to enter  
Option Select Mode. When selecting options, the Dark or  
Quiet buttons must be pressed within 20 seconds or Option  
Select Mode will automatically be exited.  
Vehicle Battery Monitor (XTR-590 only)  
The vehicles battery voltage can be displayed  
by pressing and holding the Dark and Quiet  
buttons simulatneously.  
Press and hold Menu button to exit Option Select Mode.  
14  
12  
13  
 
OPERATION  
POP MODE ALERTS  
Because POPMode radar utilizes the same  
K or Ka band frequencies, POPMode Alerts will be  
displayed as regular radar alerts.  
VG-2 ALERTS  
Stay Alert Feature  
POP Mode Alerts  
VG-2 Audio/Visual Alerts  
The Stay Alert Feature is designed to test a drivers alert-  
ness. To engage (when the unit is not alarming) :  
Note: You must turn this feature on before it will detect VG-2.  
When a VG-2 signal is detected, the detector “hides” its  
own radiated signal and becomes undetectable by the  
VG-2. Every 30 seconds, the detector checks for a VG-2  
signal. If a VG-2 signal is still present, the unit continues  
to hide and repeats the VG-2 alert. If no signal is detect-  
ed, two beeps are provided, indicating an “all clear”  
condition. During a VG-2 Alert X, K, and Ka band signals  
cannot be received (see pg. 22).  
XTR-475  
Press and hold City for less then 2 seconds. A compass  
heading icon will flash indicating Stay Alert is activated.  
LASER/RADAR ALERTS  
Within 30-60 seconds two beeps are sounded; to show alert-  
ness, the driver must press either the (Volume), City or Quiet but-  
ton within 3-5 seconds. If the button is pressed within 3-5 sec-  
onds, the cycle is repeated.  
If a button is not pressed within 3-5 seconds, alarm sounds  
and the display will flash all LEDs.  
Speed Radar Audio/Visual Alerts  
When X, K or Ka is detected, the band ID and  
signal strength is displayed. The audio alert is  
continuous and has a geiger counter-like  
pattern. The faster the beep, the closer or  
stronger the radar source.  
Alert Priority  
When two or more signals are received at the same  
time, the alert priority is:  
Press Power to cancel Stay Alert.  
1. Laser 2. VG-2 3. Speed Radar 4. Safety Radar  
Example: If X band is alerting, then suddenly a VG-2  
signal is detected, the VG-2 warning will  
override the X band alert.  
Laser Audio/Visual Alerts  
XTR-5000/5500//575/5880/590  
When a laser signal is detected the audio alert is  
continuous for a minimum of 3 seconds.  
• Press and hold the City button for approximately 2  
seconds. Release the button during or immediately after  
the alert is given. Display shows:  
• The Displays Shows:  
• The XTR-475 Shows: V/L I II III  
RESET FEATURES  
Within 30-60 seconds, two beeps are sounded; to  
show alertness, the driver must press either the City,  
Menu, or Quiet buttons within 3-5 seconds. If a button is  
pressed within 3-5 seconds, the cycle is repeated.  
If a button is not pressed within 3-5 seconds, an alarm  
sounds and the display shows:  
All user features can be reset to factory settings.  
Unplug the Power Cord from the unit.  
(XTR-500/550) Press and hold the Quiet button.  
(XTR-475/575/580/590) Press and hold the Power &  
Quiet buttons.  
®
Pulse Protection  
Pulse (or instant-on) radar is more difficult to  
detect than conventional radar because it  
remains ‘off’ until activated to measure the  
speed of a targeted vehicle.  
Plug the Power Cord into the unit.  
Wait for 2 beeps.  
Release the Quiet button.  
• Press the Dark button to exit the Stay Alert feature.  
WARNING!!! Stay Alert is NOT intended as a substitute  
for adequate rest. You should NOT operate a vehicle if you  
are drowsy. During extended periods of vehicle operation,  
you should take frequent breaks. Improper reliance on the  
Stay Alert feature may result in vehicle damage, personal  
injury or death. NEVER OPERATE A VEHICLE IF YOU  
ARE DROWSY.  
When a pulse type transmission is detected, your  
Whistler detector sounds an urgent 3-second  
audio warning and the display shows:  
Unit is now reset to the following features and settings.  
Default factory settings are:  
1. (XTR-500/550) HIGHWAY Mode  
2. (N/A on XTR-500/550) COMBO Mode  
3. Dim/Dark Mode to full illumination of display  
4. Auto Quiet Mode OFF  
5. VG-2 Detection Mode OFF  
6. Safety Radar OFF  
7. Vehicle Battery Saver ON  
8. Full Power Up sequence  
9. Default TONE 3  
SWS  
The XTR-475 shows:  
Safety Warning System™  
(Flashing)  
After the 3-second pulse alert, the standard alert  
pattern continues for as long as the signal is  
present.  
It is important to respond promptly to a pulse  
alert, since warning time may be minimal.  
In communities where transmitters are located,  
the Safety Warning Systemdisplays over 60 text mes-  
sages. When Safety Radar is detected the audio alert is  
geiger counter-like.  
10. POP ON  
11. (N/A on XTR-575) Voice ON  
12. LED Periscope to BLINK  
13. (XTR-475/575/580/590) Default Filter  
Safety Warning System Text Example: Poor - Road - Surface.  
Note: Not all areas have Safety Warning Systemtransmitters.  
15  
16  
17  
 
TROUBLESHOOTING  
CARE AND MAINTENANCE  
FCC INFORMATION  
Your Whistler detector is expertly engineered  
and designed to exacting quality standards to  
provide you with reliable, trouble-free operation.  
If your unit has been correctly installed following  
the guidelines in this manual, but is not  
operating optimally, please refer to the  
troubleshooting guide below.  
FCC ID : HSXWH10  
Care And Maintenance  
FCC ID : HSXWH13  
During the summer months, avoid prolonged  
exposure to direct sunlight by removing your unit  
from the dash when your vehicle is parked for an  
extended period of time. Do not spray water,  
cleaners, or polishes directly onto the unit. The  
spray may penetrate through the openings and  
damage the unit. Also, do not use any abrasive  
cleaners on the units exterior.  
FCC ID : HSXWH21  
This device complies with part 15 of the FCC  
Rules. Operation is subject to the following two  
conditions:  
(1) This device many not cause harmful  
interference, and  
(2) this device must accept any interference  
received, including interference that may cause  
undesired operation.  
PROBLEM: No display or audio.  
• Check fuse in plug; replace if necessary with a  
2 amp 3AG type.  
• Check fuse for lighter socket; replace if  
necessary.  
• Make sure lighter socket is clean.  
ARE DETECTORS LEGAL?  
In Most States YES!  
Important: FCC requirements state that  
changes or modifications not expressly approved  
by Whistler could void the users authority to  
operate the equipment.  
Laser-Radar detectors are legal in every state  
(with the exception of Virginia and Washington,  
D.C., which have local regulations restricting the  
use of radar receivers in any vehicle) when used  
in automobiles or light trucks (under 10,000 lbs.).  
PROBLEM: Unit alarms when vehicle hits  
bumps.  
• Check for loose lighter socket; tighten and  
clean.  
• Check connections at both ends of power  
cord. Substitute another cord to determine if  
cord is defective. Return defective cord to  
the factory.  
SPEED MONITORING  
Radar Facts  
Concerning trucks over 10,000 lbs., the Federal  
Highway Administration (FHWA) issued a  
A radar gun operates by transmitting radio  
waves at certain frequencies which reflect off  
objects and are picked up by the radar guns  
receiving section. When a radar beam reflects  
off a moving target, a measurable frequency shift  
occurs. The radar unit converts this shift into miles  
per hour to determine your vehicles speed.  
Currently, the FCC (Federal Communications  
Commission) permits operation of traffic radar  
guns at X Band (10.500 - 10.550 GHz), K Band  
(24.050 - 24.250 GHz), and Ka Band (33.400 -  
36.000 GHz).  
regulation, effective January, 1994 which prohibits  
radar and laser detector use in these types of  
vehicles nationally. Prior to the FHWA regulation,  
laws existed in the state of New York restricting  
the use of radar detectors in trucks over 18,000  
lbs. and in Illinois in trucks over 26,000 lbs.  
PROBLEM: Audio alerts are not loud  
enough.  
• Cancel Auto Quiet Mode or City Mode.  
• Check audio level setting (see pg. 8).  
If difficulties occur which cannot be solved by  
information in this Troubleshooting Guide, please  
call Whistler Customer Service at 1-800-531-0004  
or visit our FAQ page at  
www.whistlergroup.com/faq-detectors.asp,  
before returning your unit for service.  
Note: A radar detector will only alarm if an  
officer is transmitting on any one of the above  
radar bands.  
18  
19  
20  
 
SPEED MONITORING  
SPEED MONITORING  
SPEED MONITORING  
POP™ Mode  
Note: Having a radar detector capable of  
detecting the VG-2 may alert you to the pres-  
ence of a speed trap. The newest tool  
Police have to detect radar detectors is  
called Spectre. Spectre can detect the  
majority of undetectable (VG-2) laser/radar  
detectors on the market.  
Laser Tips  
POPMode is a feature on some newer radar  
guns operating on K and Ka bands. When the gun  
is in POPMode and activated, a brief burst of  
energy, less that 1/15 of a second, is transmitted  
and the vehicles speed is quickly acquired. A  
detector without POPMode detection capability  
cannot respond to this brief transmission.  
If you are the targeted vehicle, a laser gun can  
often determine your speed within a few  
seconds after you receive an alert. In this situa-  
tion, there is generally no time to safely adjust  
your speed. However, if you are traveling near or  
behind the targeted vehicle and receive an alert,  
response time should be sufficient. Any laser  
alert, regardless of duration, requires immediate  
action!  
It is the responsibility of the individual radar detector  
owner to know and understand the laws in your area  
regarding the legality of the use of radar detectors.  
Laser Facts  
Its well documented that many radar guns  
cannot reliably provide the speed of a targeted  
vehicle that is traveling in a group of vehicles. In  
contrast, a laser gun can target a specific vehicle  
out of a line of traffic and determine its speed. The  
advantage of laser over radar in terms of  
target identification is the result of the laser guns  
narrow beam. A radar guns transmission can  
cover more than a four-lane highway at a distance  
of 1,000 feet, compared with a laser guns trans-  
mission which covers about 3 feet at the same dis-  
tance. For best protection, keep these points in  
mind:  
Other Speed Detection Systems  
WARRANTY INFORMATION  
Several techniques other than radar or laser are  
used to measure vehicle speeds. When these  
methods are being used, no detector can provide  
a warning. These techniques include:  
Consumer Warranty  
This Whistler Laser-Radar detector is warranted  
to the original purchaser for a period of one  
year from the date of original purchase against  
all defects in materials and workmanship. This  
limited warranty is void if the unit is abused,  
modified, installed improperly, or if the housing  
and/or serial numbers have been removed.  
There are no express warranties covering this  
product other than those set forth in this war-  
ranty. All express or implied warranties for this  
product are limited to the above time. Whistler  
is not liable for damages arising from the use,  
misuse, or operation of this product.  
• Pacing - A patrol car drives behind you and  
matches your driving speed.  
• Vascar/Aircraft - The time it takes a vehicle to  
travel a known distance is measured.  
Radar Detector Detectors: VG-2,  
Spectre  
• Because the vehicles license plate or  
headlights are the laser guns primary targets,  
mounting the Whistler detector on the  
dashboard can improve laser detection at short  
range.  
• Do not follow closely behind any vehicle you  
cannot see through. If you can’t see past a  
vehicle ahead of you, chances are your detector  
can’t either.  
• The receiving range of your laser detector will  
not be the same as a radar detector. Laser guns  
are most often used at short range.  
The Interceptor VG-2 or simply VG-2, is one type of  
microwave receiver used by Police to detect signals  
radiated by the local oscillator of a radar detector.  
Because its purpose is to identify persons driving  
with radar detectors, these devices are known as a  
“radar detector detector” (RDD).  
An RDD is the primary tool used by the police to  
identify radar detector equipped vehicles. If caught  
in a state or country where detectors are illegal (see  
page 19), drivers risk losing their radar detector and  
receiving a fine. In addition, instant-on radar is  
almost always used in combination with an RDD,  
leaving unsuspecting motorists vulnerable to receive  
two tickets - one potential for speeding, and the  
other for possession of a detector.  
Whistler Laser-Radar detectors receive all current  
laser guns which operate at a laser wavelength of 905  
+/- 10nm.  
Pro LaserI II III  
LT1 20-20  
•Ultra Lyte  
21  
22  
23  
 
WARRANTY INFORMATION  
WARRANTY INFORMATION  
WARRANTY INFORMATION  
ACCESSORIES  
3. Be certain your unit is returned with its serial  
number. For reference, please write your units  
serial number in the following space:  
s/n______________.  
Important: When returning your unit for service,  
be certain to include a daytime telephone  
number and an email address (if applicable).  
Service Under Warranty  
These and other accessories can be  
ordered directly from Whistler by calling  
1-800-531-0004 or visiting our online store  
at www.whistlergroup.com  
During the warranty period, defective units will  
be repaired without charge to the purchaser when  
returned with a dated store receipt to the address  
below. Units returned without a dated store  
receipt will be handled as described in section  
“Service Out Of Warranty.”  
Due to the specialized equipment necessary for  
testing a Laser-Radar receiver, there are no  
authorized service stations for Whistler brand  
detectors other than Whistler.  
Customer Service  
Units without serial numbers are not covered under warranty.  
If you have questions concerning the operation of your  
Whistler detector, or require service during or after the  
warranty period, please call Customer Service at:  
Important: To validate that your unit is within  
the warranty period, make sure you keep a  
copy of your dated store receipt. You may  
register your warranty online at  
Order # Description  
Price  
$ 9.95  
$9.95  
1-800-531-0004  
Representatives are available to answer your questions  
Monday - Friday from 8:00 a.m. to 5:00 p.m. (CT) or  
visit the FAQs at www.whistlergroup.com.  
500501  
202151  
202152  
206552  
206553  
206880  
Zipped Travel Case  
warranty verification purposes, a copy of  
your dated store receipt must accompany any  
unit sent in for warranty work.  
Windshield Bracket Kit  
Large Windshield Bracket Kit  
Straight Power Cord (5’)  
Coiled Power Cord (7’)  
$9.95  
When returning a unit for service, please follow  
these instructions:  
$14.95  
$15.95  
$9.95  
Service Out of Warranty  
Units will be repaired at “out of warranty” serv-  
ice rates when:  
• The units original warranty has expired.  
• A dated store receipt is not supplied.  
• The unit has been returned without its serial  
number.  
• The unit has been abused, modified,  
installed improperly, or had its housing  
removed.  
SPECIFICATIONS  
1. Ship the unit in the original carton or in a  
suitable sturdy equivalent, fully insured, with  
return receipt requested to:  
Laser Wavelength:  
Hardwire Kit (10' )  
(for wiring to fuse box)  
905 50 nanometers (nm)  
Radar Frequencies:  
206666  
Modular* Cord Package  
(includes coiled and straight  
cords, and power adapter)  
$17.95  
Whistler Repair Dept.  
551 N. 13th St.  
Rogers, AR. 72756  
10.500 - 10.550 GHz (X Band)  
24.050 - 24.250 GHz (K Band )  
33.400 - 36.000 GHz (Ka Superwideband)  
159032  
402081  
206660  
Package of 8 Suction Cups  
Non Skid Dash Pad  
$2.95  
$6.95  
Please allow 3 weeks turnaround time.  
Important: Whistler will not assume responsi-  
bility for loss or damage incurred in shipping.  
Therefore, please ship your unit insured with  
return receipt requested. CODs will not be  
accepted!  
Operating Temperature Range:-10˚ C to +70˚ C  
(14˚ F to +158˚ F)  
The minimum out of warranty service fee for  
your Whistler detector is $55.00 (U.S.). If you  
require out of warranty service, please return  
your unit as outlined in the section “Service  
Under Warranty” along with a certified check or  
money order for $55.00. Payment may also be  
made by MasterCard, VISA or American  
Straight Modular Cord &  
Socket Multiplier  
$11.95  
$12.95  
Power Requirements:  
206661  
Coiled Modular Cord &  
Socket Multiplier  
Operational 12 to 15 volts DC, 250mA nominal  
Vehicle Battery Saver, 30mA nominal.  
2. Include with your unit the following  
information, clearly printed:  
* Modular: Interconnecting pieces cord and plug.  
Shippiing andd handlling ((pper ordder) $55.00 . PPrices  
are subjeect to channge withouut notice.  
Your name and street address (for  
shipping via UPS), a daytime telephone  
number and an email address, if applicable.  
• A detailed description of the problem (e.g.,  
“Unit performs self-test but does not respond  
One or more U.S. patents may apply:  
#5,146,227, #5,379,456, #5,666,120,  
#5,990,821, #7,215,276  
Express; personal checks are not accepted.  
In the event repairs cannot be covered by the min-  
imum $55.00 service fee, you will be contacted by  
a Whistler technical service specialist who will out-  
line options available to you.  
If you elect not to have your unit repaired, it will  
be returned to you along with your certified  
check or money order.  
POPMode is a trademark of MPH Industries, Inc.  
`
to radar”).  
SWSis a trademark of Safety Warning System L.C.  
• A copy of your dated store receipt or bill of  
sale.  
Specifications are subject to change  
without notice.  
24  
25  
26  
27  
 

Westinghouse Fryer WST3034 User Manual
Whirlpool Dishwasher DU1000 User Manual
Whirlpool Washer WTW6600SB1 User Manual
Whistler Bluetooth Headset BT2200 User Manual
White Rodgers Thermostat 1D56 310 User Manual
White Rodgers Thermostat 179 User Manual
White Rodgers Water Heater 1127 User Manual
Yamaha Musical Instrument Amplifier Bass Amplifier User Manual
Yamaha Network Card DB SREV1 User Manual
Yamaha Welding System EC4000DV User Manual