Whistler Radar Detector XTR 695 User Manual

INTRODUCTION  
OWNER’S MANUAL  
Note: Your warranty period begins at  
the time of purchase. The warranty  
is validated only by the dated store  
receipt! Please record the serial num-  
ber of the unit in the space provided in  
the warranty section of the manual.  
To fully acquaint yourself with the  
operation of your Whistler detector  
and to better understand the differ-  
ences between detecting radar, laser,  
and safety radar signals, we recom-  
mend reading this entire manual or  
visiting our F.A.Q. page on our web-  
site www.whistlergroup.com  
Dear Whistler Owner,  
If you have questions concerning the oper-  
ation of this Whistler product please  
call:  
XTR-690/695  
Total Band Protection™  
LASER-RADAR  
CuSTOmer SeRVICE  
1-800-531-0004  
Monday - Friday • 8:00 am - 5:00 pm CT  
or visit our website  
DETECTOR  
www.whistlergroup.com  
Please keep the receipt in a safe place.  
You may register your product online  
at www.whistlergroup.com. For warranty  
verification purposes, a copy of your dated  
store receipt must still accompany any unit  
sent in for warranty work. If the unit is  
returned without a dated store receipt, an  
out of warranty service charge applies.  
The Whistler Group Corporate Headquarters  
13016 N. Walton Blvd. • Bentonville, AR 72712  
Tel 479.273.6012 • Fax 479.273.2927  
Customer Return Center  
551 N. 13th St. • Rogers, AR 72756  
Enjoy your Whistler detector and  
Customer Service Tel 800.531.0004  
please drive safely.  
www.whistlergroup.com  
One or more U.S. patents may apply:  
#5,146,227, #5,379,456, #5,666,120,  
#5,990,821, #7,215,276  
Sincerely,  
The Whistler Group, Inc.  
P/N 260013,  
©
2008 The Whistler Group, Inc.  
 
INSTALLATION  
INSTALLATION  
OPERATION  
Mounting Guidelines  
Windshield Mounting  
Power On, Self Test  
• Mount the unit as low as possible near the  
center of the windshield.  
• Install the two suction cups and rubber bumper  
onto the bracket by fitting them into their holes.  
• Press the suction cups onto the windshield at the  
location you have chosen.  
To turn the Power ON or OFF, push the center  
of the Power/Volume button.  
Each time your Whistler detector is turned on,  
an automatic self-test sequence confirms that  
the speaker and visual displays are functional.  
• Display shows in order:  
1. WHISTLER 2. X-band 3. K-band 4. Ka-band  
5. LASER ON 6. SR OFF 7. VOICE ON 8. POP  
ON 9. B SVR ON 10. FILTER 11. COMBO 12. HIGH-  
WAY  
• Do not mount the unit behind wipers,  
ornaments, mirrored sunscreens, etc. These  
obstructions have metal surfaces which can  
affect radar and laser signals and reduce  
critical warning time. (Regular tinted glass  
does not affect reception).  
Important: Some newer cars have a plastic safety  
coating on the inside of the windshield. The wind-  
shield bracket may leave permanent marks on this  
type of surface. To find out if your vehicle has this  
type of windshield, check the owners manual or ask  
your dealer. We recommend that you do not leave  
the suction cup bracket on the window in direct sun-  
light. If the detector is removed, this may cause  
blistering of the dash in some vehicles.  
• Slide the detector onto the bracket until it locks into  
place.  
• Some windshields have an Instaclearor  
Electricleartype coating, which affect radar  
signals. Consult your dealer or the owners  
manual supplied with your vehicle to determine  
if your windshield has this coating.  
• Avoid placing the unit in direct contact with the  
windshield.  
Teach/Tutorial Mode  
Provides simulated alerts for each type of signal.  
• Press City and Quiet buttons simultaneously  
• Display Shows:  
To reduce the possibility of theft, conceal your  
unit when not in use.  
• If necessary, the unit may be leveled by bending the  
windshield bracket. Press the bracket release button  
and remove the detector before bending.  
• Press Dark button to exit.  
Setting Saver  
Setting Saver saves your personalized settings  
so that when the detector is turned off and then  
on again, you do not have to re-enter them.  
Power Cord Connection  
• Plug the small end of the power cord into the  
units power jack.  
Windshield  
Mounting  
• Plug the large end into the vehicles cigarette lighter.  
Feature Engaged Confirmation  
Each time a button is pressed, one beep confirms  
feature “on”, two beeps confirm feature “off”.  
Note: Cord fits tightly into detector. When  
IMPORTANT: Make sure the unit is level  
installing the cord, expect some resistance.  
®
Fuse Replacement  
Integrated Real Voice  
When selected, Real Voice® will be used to articu-  
late the following:  
The lighter socket plug is equipped with a  
replaceable 2 amp 3AG fuse located behind the  
silver tip. To replace the fuse, carefully unscrew  
the tip of the plug.  
1. Band Identification  
2. Safety Warning System messages  
3. Feature Selection  
Rubber Bumper  
Important: Unscrew slowly. The tip contains a  
spring which may fly out when disassembling.  
Insert the new fuse with the spring and screw on  
the tip. With use, screw cap on plug may loosen.  
Retighten occasionally.  
Note: In certain cases the voice message does not  
replicate the text message.  
5
6
7
 
OPERATION  
OPERATION  
OPERATION  
Audio Level Adjustment  
The audio levels can be adjusted high to low or  
low to high.  
City/City 1/City 2 Mode  
Twin Alert Periscope  
Whistlers Three Stage City Mode is designed to  
reduce the annoyance of automatic door openers,  
intrusion alarms and other devices which share frequencies  
with police radar. Generally, X band is used for these  
devices.  
• Press City button to cancel Highway Mode  
and engage City Mode.  
• Press City button again to enter City 1 Mode.  
• Press City button again to enter City 2 Mode.  
• Pressing City button a fourth time cancels City 2  
Mode and returns the unit to Highway Mode.  
Whistlers new Twin Alert Periscope provides an added  
attention getting visual alert. The two extra LEDs flash on  
and off when the unit alarms to provide a unique visual  
alert. This alert can be programmed, through the Option  
Select Mode to: 1. flash for all alarms, 2. remain on, or 3.  
turn LEDs off completely.  
• Move Power/Volume button back to increase  
audio level.  
• Move Power/Volume button forward to  
decrease audio level. As audio level is  
adjusted, beeps are provided and the display  
indicates volume level.  
Compass Mode  
The unit is programmed from the factory in “Combo  
Mode”. COMBO mode means that the unit provides  
both compass readings as well as detecting laser/radar  
signals. Through the “Option Select Mode”, either  
laser/radar or compass features can be turned off mean-  
ing, RADAR equals detection of all police bands and  
laser; COMPASS equals no detection of police  
laser/radar.  
Auto Quiet Mode  
Auto Quiet reduces the selected audio level to  
level (1) approximately 5 seconds after a radar or  
safety radar signal is detected. The alert for any  
new signal within 20 seconds will resume at level  
(1). Auto Quiet does not affect laser alerts.  
• Press Quiet (before a signal is detected) to  
engage Auto Quiet.  
In City Mode, weak speed/safety radar signals give  
an initial alarm of two beeps, and then remains  
quiet unless the signal becomes very strong. When  
the signal strength increases, two additional beeps  
are provided. City 1 and City 2 Modes operate the  
same as Highway Mode, but in City 1 Mode, only the  
X band sensitivity is lowered. In City 2 Mode, X-band  
is not detected.  
Note: The unit must be calibrated to provide accurate  
compass readings. See Compass Calibration Set-up  
section on page 14.  
• Once the Auto Quiet mode is engaged, you  
may cancel the audio alarm by pressing Quiet.  
• Press Quiet (when the unit is not alarming) to  
cancel Auto Quiet mode.  
Caution: Some towns/small cities may still be using X  
band radar. City Modes do not change the audio alert  
for laser.  
Dim/Dark Mode  
Dim/Dark Mode reduces the illumination of the display.  
Press the Dark button to reduce illumination to a  
Dim setting.  
Quiet Mode  
Highway Mode  
Quiet cancels audio during an alert and any new  
alert within 20 seconds. After 20 seconds of no  
radar signal detected, on the XTR-690, 2 beeps are  
provided on any new alert and then the audio  
remains quiet; on the XTR-695 the audio alerts are  
restored.  
Highway mode provides full audio warnings any  
time radar (X, K, Ka, Safety Radar) or laser signals  
are detected, and is recommended for open road  
driving.  
Pressing the Dark button a second time engages Dark  
Mode. The display illumination is further reduced.  
Dim or Dark Mode can be engaged during an alert. In  
Dark Mode, the display goes dark for as long as a signal  
is being detected and for 20 seconds after, then the dis-  
play returns to the dimmer setting.  
Note: In Combo Mode an “H” or “C” will be shown to  
indicate mode of operation.  
• Press Quiet to cancel the audio.  
For more information on City and Highway modes, please visit  
our F.A.Q. page on our website: www.whistlergroup.com  
Pressing the Dark button a third time restores full  
illumination to the display.  
• Press Quiet a second time during an alert to  
restore the standard audio alert pattern; or turn the  
unit off, then on.  
7 Color Multi-band Display (XTR-695 only)  
The display can be set so that each Band alert can be a  
different color (i.e. K Band alerts in Blue, X Band alerts in  
Green, Ka Band alerts in Purple, etc,) or Scroll ALL colors  
while alarming. To make changes see Option Select  
Mode steps 17 thru 20 on page 12.  
Vehicle Battery Monitor  
External Audio Jack (XTR-695 only)  
The External Audio Jack can be used to connect  
an external speaker or headphones in environ-  
ments with high ambient noise levels. The inter-  
nal speaker will be disconnected.  
The vehicles battery voltage can be displayed  
by pressing and holding the Dark and Quiet  
buttons simulatneously.  
8
9
10  
 
OPERATION  
OPERATION  
OPERATION  
Vehicle Battery Saver Mode  
Option Select Mode  
Stay Alert Feature  
The Vehicle Battery Saver Mode automatically shuts  
off your detector after 3 hours by default. The timer  
is reset if the detector is turned off, unplugged or  
any button is pressed before the timer has expired.  
The detector will alert you with an audible and visu-  
al warning before it shuts off. During this warning,  
you can momentarily reset the timer by pressing any  
button. If the unit has automatically turned itself off,  
press any button to turn the unit back on. Refer to  
“Option Select Mode” for instructions for  
changing the battery saver mode options.  
Entering Option Select Mode allows you to customize  
options such as Tone Select and Abbreviated Power Up  
Sequence. Press the Menu button to enter Option Select  
Mode. When selecting options, the Dark or Quiet buttons  
must be pressed within 20 seconds or Option Select Mode  
will automatically exit. To enter:  
The Stay Alert Feature is designed to test a drivers  
alertness. To engage (when the unit is not alarming) :  
• Press and hold the City button for approximate-  
ly 2 seconds. Release the button during or imme-  
diately after the alert is given. Display shows:  
Within 30-60 seconds, two beeps are sounded;  
to show alertness, the driver must press either the  
City, Menu, or Quiet buttons within 3-5 seconds. If a  
button is pressed within 3-5 seconds, the cycle is  
repeated.  
If a button is not pressed within 3-5 seconds, an  
alarm sounds and the display shows:  
Filter Mode  
There are times when a radar detector can emit  
the same frequency as police radar and can  
cause your detector to falsely alarm. Sometimes  
a detector can display a signal when picking up  
another radar detector in vehicle close by. The  
Whistler Filter Mode options provide a method  
to study the signal which will verify if the signal  
is a legitimate police radar or a false alert from  
another detector. Three options exist:  
Filter: Allows for normal filtering.  
• Press the Dark button to exit the Stay Alert feature.  
WARNING!!! Stay Alert is NOT intended as a  
substitute for adequate rest. You should NOT oper-  
ate a vehicle if you are drowsy. During extended  
periods of vehicle operation, you should take fre-  
quent breaks. Improper reliance on the Stay Alert  
feature may result in vehicle damage, personal  
injury or death. NEVER OPERATE A VEHICLE IF  
YOU ARE DROWSY.  
Filter 1: Provides and extra step to analyze the  
legitimacy of the signal.  
Filter 2: Provides 2 extra steps to analyze legiti-  
macy of the signal.  
SWS  
Safety Warning System™  
In communities where transmitters are located,  
the Safety Warning Systemdisplays over 60  
text messages. When Safety Radar is detected  
the audio alert is geiger counter-like.  
Filter is the factory default and should provide  
adequate filtering for most conditions. If you  
experience excessive alerts due to radar detec-  
tors in other vehicles, try the Filter 1 option. If  
you continue to receive alerts from radar detec-  
tors, use the Filter 2 option. Filter Mode does  
not override Highway or City settings. See  
Option Select Mode to change Filter settings.  
Safety Warning System Text  
Example: Poor - Road - Surface.  
Note: Not all areas have Safety Warning System™  
transmitters.  
Press the Power button to exit Option Select Mode.  
11  
12  
13  
 
OPERATION  
OPERATION  
OPERATION  
(XTR-6995 only)) Whistler has two new exciting fea-  
tures that will assist the driving enthusiast to further  
identify threats from laser and Ka band radar guns.  
Alert Priority  
Reset Features  
When two or more signals are received at the  
same time, the alert priority is:  
1. Laser 2. Speed Radar 3. Safety Radar  
Example: If X band is alerting, then suddenly a  
laser signal is detected, the laser warning will  
override the X band alert.  
All user features can be reset to factory settings.  
•Unplug the Power Cord from the unit.  
•Press and hold the Power and Quiet buttons.  
•Plug the Power Cord into the unit.  
•Wait for 2 beeps.  
•Release the Power and Quiet buttons.  
Unit is now reset to the following features  
and settings.  
Ka RSID (Ka Radar Signal IDentifier)  
Identify the difference between the likelihood of a  
Ka threat vs. the likelihood of a Ka false from anoth-  
er source (possible radar detector). The Ka RSID  
feature will educate you to the common Ka speed  
radar by displaying the nominal police radar fre-  
quencies of 33.8GHz / 34.0GHz / 34.3GHz / 34.7GHz  
/ 35.5GHz. The Ka alerts that do not fall into the com-  
mon Ka speed radar windows will be reported only as  
Ka.  
Note: This product is not a frequency counter. Your  
XTR-695 will categorize the received Ka signal and  
select the appropriate information. Treat every Ka  
alert with caution.  
Compass Calibration Set-up  
The unit will need to be calibrated in order for  
the compass to provide accurate readings. To  
calibrate the unit, perform the following proce-  
dure:  
1. Mount the unit level in the center of the  
vehicles windshield. Make sure there are no  
other magnetic sources near the detector  
(i.e., speaker).  
2. Select a large clear area (parking lot or field)  
without any power lines.  
3. Press the Menu button until display shows  
CAL MODE. Then press the Dark and Quiet buttons  
simultaneously. The display shows (scrolling):  
Default factory settings are:  
1. S1: (For Intellicord®) Power ON or OFF.  
2. S2: (For Intellicord®) Quiet feature.  
3. Combo Mode.  
4. HIGHWAY Mode.  
5. Dim/Dark Mode to full illumination of display.  
6. Auto Quiet Mode OFF.  
7. Safety Radar OFF.  
LSID (Laser Signal IDentifier)  
Identify the Laser guns pulse rate or PPS (Pulses Per  
Second) that is transmitted by the speed laser gun.  
LSID may also be used to identify other forms of  
laser sources such as LACC (Laser Assisted Cruise  
Control) systems found in some high end vehicles.  
If the Laser PPS information displayed is due to  
another source such as local airports or LACC, LSID  
allows you to Lock Out this rate from giving you the  
continuous audio alert during this and any new  
encounter of the same rate. To Lock Out a PPS, sim-  
ply press the Quiet button during the Laser alert.  
This will place an * on the screen beside the PPS  
rate and Lock Out this signature ID. Any new  
encounter with the same Laser Signature ID will pro-  
vide the display information and two quick beeps.  
8. Vehicle Battery Saver ON/3hrs.  
9. Full Power Up sequence.  
10. Default TONE 3.  
11. All Bands ON.  
12. Laser ON.  
4. If calibration does not automatically finish press  
the Dark and Quiet buttons simultaneously to com-  
plete calibration. The unit will beep twice and dis-  
play shows, for example:  
13. POP ON.  
14. Voice ON.  
15. LED Periscope to BLNK.  
Intellicord® Ready  
Using Whistlers optional Intellicord® Power Cable  
allows some models to control the detectors fea-  
tures such as Power On/Off, City Modes,  
Dim/Dark, and Quiet/Auto Quiet with a simple  
press of the button on the Power Cable. Two fea-  
tures can be controlled: one by a short press of  
the button, and the second by a long press of the  
button. Option Mode allows the user to program  
the feature assignments.  
Note: In Combo Mode an “H” or “C” will be  
shown to indicate mode of operation.  
Note: Common Laser PPS rates used in the USA  
are 100 / 125 / 130 / 200 / 238 / 380Hz. Others Laser  
PPS rates used outside the USA include 600Hz.  
Important: If unit mounting is relocated in the  
vehicle, (i.e., visor to windshield mounting or  
dash mounting), or if the unit is moved to  
another vehicle, you must recalibrate the com-  
pass.  
Caution: Do not lock out a PPS rate if is is close to  
known speed laser guns.  
14  
15  
16  
 
POP MODE ALERTS  
Because POPMode radar utilizes the same  
K or Ka band frequencies, POPMode Alerts will be  
displayed as regular radar alerts.  
TROUBLESHOOTING  
CARE AND MAINTENANCE  
Your Whistler detector is expertly engineered  
and designed to exacting quality standards to  
provide you with reliable, trouble-free operation.  
If your unit has been correctly installed following  
the guidelines in this manual, but is not  
operating optimally, please refer to the  
troubleshooting guide below.  
POP Mode Alerts  
Care And Maintenance  
During the summer months, avoid prolonged  
exposure to direct sunlight by removing your unit  
from the dash when your vehicle is parked for an  
extended period of time. Do not spray water,  
cleaners, or polishes directly onto the unit. The  
spray may penetrate through the openings and  
damage the unit. Also, do not use any abrasive  
cleaners on the units exterior.  
LASER/RADAR ALERTS  
Speed Radar Audio/Visual Alerts  
When X, K or Ka is detected, the band ID and  
signal strength are displayed. The audio alert is  
continuous and has a geiger counter-like  
pattern. The faster the beep, the closer or  
stronger the radar source.  
PROBLEM: No display or audio.  
• Check fuse in plug; replace if necessary with a  
2 amp, 3AG type.  
• Check fuse for lighter socket; replace if  
necessary.  
• Make sure lighter socket is clean.  
ARE DETECTORS LEGAL?  
In Most States YES.  
Laser-Radar detectors are legal in every state  
(with the exception of Virginia and Washington,  
D.C., which have local regulations restricting the  
use of radar receivers in any vehicle) when used  
in automobiles or light trucks (under 10,000 lbs.).  
Laser Audio/Visual Alerts  
When a laser signal is detected the audio alert is  
continuous for a minimum of 3 seconds.  
PROBLEM: Unit alarms when vehicle hits  
bumps.  
• Check for loose lighter socket; tighten and  
clean.  
• Check connections at both ends of power  
cord. Substitute another cord to determine if  
cord is defective. Return defective cord to  
the factory.  
• The Displays Shows:  
Concerning trucks over 10,000 lbs., the Federal  
Highway Administration (FHWA) issued a  
®
Pulse Protection  
regulation, effective January, 1994 which prohibits  
radar and laser detector use in these types of  
vehicles nationally. Prior to the FHWA regulation,  
laws existed in the state of New York restricting  
the use of radar detectors in trucks over 18,000  
lbs. and in Illinois in trucks over 26,000 lbs.  
Pulse (or instant-on) radar is more difficult to  
detect than conventional radar because it  
remains ‘off’ until activated to measure the speed  
of a targeted vehicle.  
PROBLEM: Audio alerts are not loud  
enough.  
• Cancel Auto Quiet Mode or City Mode.  
• Check audio level setting (see page 8 ).  
When a pulse type transmission is detected, your  
Whistler detector sounds an urgent 3-second  
audio warning and the display shows:  
FCC INFORMATION  
If difficulties occur which cannot be solved by  
information in this Troubleshooting Guide, please  
call Whistler Customer Service at 1-800-531-0004  
or visit our F.A.Q. page at  
www.whistlergroup.com/faq-detectors.asp,  
before returning your unit for service.  
FCC ID: HSXWH20  
This device complies with part 15 of the FCC Rules.  
Operation is subject to the following two condi-  
tions:  
After the 3-second pulse alert, the standard alert  
pattern continues for as long as the signal is  
present.  
It is important to respond promptly to a pulse  
alert, since warning time may be minimal.  
(1) This device many not cause harmful interference,  
(2) this device must accept any interference  
received, including interference that may cause unde-  
sired operation.  
Important: FCC requirements state that changes or  
modifications not expressly approved by Whistler could  
void the users authority to operate the equipment.  
17  
18  
19  
 
SPEED MONITORING  
SPEED MONITORING  
SPEED MONITORING  
POP™ Mode  
Laser Tips  
Radar Detector Detectors: VG-2,  
POPMode is a feature on some newer radar  
guns operating on K and Ka bands. When the gun  
is in POPMode and activated, a brief burst of  
energy, less that 1/15 of a second, is transmitted  
and the vehicles speed is quickly acquired. A  
detector without POPMode detection capability  
cannot respond to this brief transmission.  
If you are the targeted vehicle, a laser gun can  
often determine your speed within a few  
seconds after you receive an alert. In this situa-  
tion, there is generally no time to safely adjust  
your speed. However, if you are traveling near or  
behind the targeted vehicle and receive an alert,  
response time should be sufficient. Any laser  
alert, regardless of duration, requires immediate  
action.  
Spectre  
The Interceptor VG-2 or simply VG-2, is one type of  
microwave receiver used by Police to detect signals  
radiated by the local oscillator of a radar detector.  
Because its purpose is to identify persons driving with  
radar detectors, these devices are known as a “radar  
detector detector” (RDD).  
An RDD is the primary tool used by the police to identify  
radar detector equipped vehicles. If caught in a state or  
country where detectors are illegal (see page 19), drivers  
risk losing their radar detector and receiving a fine. In  
addition, instant-on radar is almost always used in com-  
bination with an RDD, leaving unsuspecting motorists  
vulnerable to receive two tickets; one potential for  
speeding, and the other for possession of a detector.  
Note: The newest tool Police have to detect radar  
detectors is called Spectre. Spectre can detect the  
majority of undetectable (VG-2) laser/radar detectors  
on the market.  
Laser Facts  
Its well documented that many radar guns  
cannot reliably provide the speed of a targeted  
vehicle that is traveling in a group of vehicles. In  
contrast, a laser gun can target a specific vehicle  
out of a line of traffic and determine its speed. The  
advantage of laser over radar in terms of  
target identification is the result of the laser guns  
narrow beam. A radar guns transmission can  
cover more than a four-lane highway at a distance  
of 1,000 feet, compared with a laser guns trans-  
mission which covers about 3 feet at the same dis-  
tance. For best protection, keep these points in  
mind:  
Radar Facts  
A radar gun operates by transmitting radio  
waves at certain frequencies which reflect off  
objects and are picked up by the radar guns  
receiving section. When a radar beam reflects  
off a moving target, a measurable frequency shift  
occurs. The radar unit converts this shift into miles  
per hour to determine your vehicles speed.  
Currently, the FCC (Federal Communications  
Commission) permits operation of traffic radar  
guns at X Band (10.500 - 10.550 GHz), K Band  
(24.050 - 24.250 GHz), and Ka Band (33.400 -  
36.000 GHz).  
It is the responsibility of the individual radar detector  
user to know and understand the laws in your area  
regarding the legality of the use of radar detectors.  
• Because the vehicles license plate or  
headlights are the laser guns primary targets,  
mounting the Whistler detector on the  
dashboard can improve laser detection at short  
range.  
• Do not follow closely behind any vehicle you  
cannot see through. If you can’t see past a  
vehicle ahead of you, chances are your detector  
can’t either.  
• The receiving range of your laser detector will  
not be the same as a radar detector. Laser guns  
are most often used at short range.  
WARRANTY INFORMATION  
Note: A radar detector will only alarm if an  
officer is transmitting on any one of the above  
radar bands.  
Consumer Warranty  
This Whistler Laser-Radar detector is warranted to  
the original purchaser for a period of three years from  
the date of original purchase against all defects in  
materials and workmanship. This limited warranty is  
void if the unit is abused, modified, installed  
improperly, or if the housing and/or serial numbers have  
been removed. There are no express warranties covering  
this product other than those set forth in this warran-  
ty. All express or implied warranties for this product are  
limited to the above time. Whistler is not liable for  
damages arising from the use, misuse, or operation of  
this product.  
Other Speed Detection Systems  
Several techniques other than radar or laser are  
used to measure vehicle speeds. When these  
methods are being used, no detector can provide  
a warning. These techniques include:  
• Pacing - A patrol car drives behind you and  
matches your driving speed.  
• Vascar/Aircraft - The time it takes a vehicle to  
travel a known distance is measured.  
Whistler Laser-Radar detectors receive all current  
laser guns which operate at a laser wavelength of 905  
+/- 10nm.  
Pro LaserI II III  
LT1 20-20  
•Ultra Lyte  
20  
21  
22  
 
WARRANTY INFORMATION  
WARRANTY INFORMATION  
WARRANTY INFORMATION  
ACCESSORIES  
3. Be certain your unit is returned with its serial  
number. For reference, please write your units  
serial number in the following space:  
s/n______________.  
Important: When returning your unit for service,  
be certain to include a daytime telephone  
number and an email address (if applicable).  
Service Under Warranty  
These and other accessories can be  
ordered directly from Whistler by calling  
1-800-531-0004 or visiting our online store  
at www.whistlergroup.com  
During the warranty period, defective units will  
be repaired without charge to the purchaser when  
returned with a dated store receipt to the address  
below. Units returned without a dated store  
receipt will be handled as described in section  
“Service Out Of Warranty.”  
Due to the specialized equipment necessary for  
testing a Laser-Radar receiver, there are no  
authorized service stations for Whistler brand  
detectors other than Whistler.  
Customer Service  
Units without serial numbers are not covered under warranty.  
If you have questions concerning the operation of your  
Whistler detector, or require service during or after the  
warranty period, please call Customer Service at:  
Important: To validate that your unit is within  
the warranty period, make sure you keep a  
copy of your dated store receipt. You may  
register your warranty online at  
Order # Description  
Price  
$ 9.95  
$27.95  
$9.95  
1-800-531-0004  
Representatives are available to answer your questions  
Monday - Friday from 8:00 a.m. to 5:00 p.m. (CT) or  
visit the F.A.Q.s at www.whistlergroup.com.  
500501  
403774  
202152  
206552  
206553  
206880  
Zipped Travel Case  
Intellicord®  
warranty verification purposes, a copy of  
your dated store receipt must accompany any  
unit sent in for warranty work.  
Large Windshield Bracket Kit  
Straight Power Cord (5’)  
Coiled Power Cord (7’)  
When returning a unit for service, please follow  
these instructions:  
$14.95  
$15.95  
$9.95  
Service Out of Warranty  
Units will be repaired at “out of warranty” serv-  
ice rates when:  
• The units original warranty has expired.  
• A dated store receipt is not supplied.  
• The unit has been returned without its serial  
number.  
• The unit has been abused, modified,  
installed improperly, or had its housing  
removed.  
SPECIFICATIONS  
Radar Frequencies:  
10.500 - 10.550 GHz (X Band)  
24.050 - 24.250 GHz (K Band )  
33.400 - 36.000 GHz (Ka Superwideband)  
1. Ship the unit in the original carton or in a  
suitable sturdy equivalent, fully insured, with  
return receipt requested to:  
Hardwire Kit (10' )  
(for wiring to fuse box)  
206666  
Modular* Cord Package  
(includes coiled and straight  
cords, and power adapter)  
$17.95  
Whistler Repair Dept.  
551 N. 13th St.  
Rogers, AR. 72756  
Operating Temperature Range:-20˚ C to +80˚ C  
(-4˚ F to +176˚ F)  
159032  
402081  
206660  
Package of 8 Suction Cups  
Non Skid Dash Pad  
$2.95  
$6.95  
Please allow 3 weeks turnaround time.  
Important: Whistler will not assume responsi-  
bility for loss or damage incurred in shipping.  
Therefore, please ship your unit insured with  
return receipt requested.  
Power Requirements:  
The minimum out of warranty service fee for  
your Whistler detector is $75.00 (U.S.). If you  
require out of warranty service, please return  
your unit as outlined in the section “Service  
Under Warranty” along with a certified check or  
money order for $75.00. Payment may also be  
made by MasterCard, VISA, or American  
Express; personal checks are not accepted.  
Straight Modular Cord &  
Socket Multiplier  
Operational 12 to 15 volts DC, 250mA nominal  
Vehicle Battery Saver, 30mA nominal.  
$11.95  
$12.95  
CODs will not be accepted!  
206661  
Coiled Modular Cord &  
Socket Multiplier  
One or more U.S. patents may apply:  
#5,146,227, #5,379,456, #5,666,120, #5,990,821  
#7,215,276  
POPMode is a trademark of MPH Industries, Inc.  
SWSis a trademark of Safety Warning System L.C.  
2. Include with your unit the following  
information, clearly printed:  
* Modular: Interconnecting pieces cord and plug.  
Shippiing andd handlling ((pper ordder) $55.00 . PPrices  
are subjeect to channge withouut notice.  
Your name and street address (for  
shipping via UPS), a daytime telephone  
number and an email address, if applicable.  
• A detailed description of the problem (e.g.,  
“Unit performs self-test but does not respond  
In the event repairs cannot be covered by the min-  
imum $75.00 service fee, you will be contacted by  
a Whistler technical service specialist who will out-  
line options available to you. If you elect not to  
have your unit repaired, it will be returned to  
you along with your certified check or money  
order.  
`
to radar”).  
• A copy of your dated store receipt or bill of  
sale.  
Specifications are subject to change without notice.  
23  
24  
25  
26  
 

Welbilt Impact Driver 139270 User Manual
Westinghouse Flat Panel Television LD 4065 User Manual
Westinghouse Toaster WST3001BLK User Manual
Whirlpool Ventilation Hood UXT5230ADB User Manual
Woodstock Paint Sprayer D3274 User Manual
Wyse Technology TV Mount Release 202 User Manual
XM Satellite Radio Satellite Radio TRK SR2 User Manual
Yamaha Outboard Motor F225A User Manual
Zanussi Washer ZWF 1241 W User Manual
Zenoah Trimmer CHTZ2401, CHTZ2401L, HTZ2401, HTZ2401L User Manual