Xerox Printer 4635 IPS User Manual

Xerox DocuPrint 96/4635/180 IPS  
Master Index  
Version 7.1  
August 2000  
721P88220  
 
Index  
Numerics  
amount symbols, SOG 5-3  
ANSI specifications, IPG 1-7  
1.25 MB Data Streaming, CMS 3-4  
1/4-inch cartridge tape drive, IPG 2-6  
10Mb/sec twisted pair standard, IPG 4-7  
2.5 MB Data Streaming, CMS 3-4  
3-pitch mode, IPG A-5, SOG A-5  
4 mm cartridge tape  
applications, customer responsibility, IPG 4-3  
Apply & Update button, CMS 1-21  
Apply buttons, CMS 1-21  
AS/400  
parameters, IPG E-18IPG E-24  
ASCII, IPG 1-6  
Ask for File Name window, CMS 1-21  
Attention light, TRB 2-1  
attention light, SOG 4-6  
attributes  
drive, IPG 5-9  
ordering, IPG A-13, SOG A-13  
4 mm cartridge tape drive, IPG 2-3  
4mm cartridge tape drive, cleaning, PRM 6-7  
50 Hz voltage requirements  
finishing, CMS 4-55  
audible tones, SOG 4-15  
Auxiliary On-Us field, SOG 5-3  
Delta configurations, IPG 6-4  
Wye configurations, IPG 6-4  
60 Hz voltage requirements, IPG 6-2  
8 power (X) Comparator with MICR grid, IPG A-14,  
SOG 5-4, SOG A-14  
B
8-pitch mode, IPG A-4, SOG A-4  
back panel, Sun workstations, IPG 2-3, IPG 2-6IPG  
2-7  
A
backing up configuration files, CMS 1-13, CMS 4-63  
Backup Configuration Files window, CMS 4-64  
Barr/AFD, IPG 8-2  
base components, IPG 2-1IPG 2-10  
BCOCA (Bar code Object Content Architecture),  
SOG 1-5  
ABA standards, IPG 1-7  
access control, SOG 1-16  
access requirements, delivery, IPG 6-24–IPG 6-28  
ACT icon, SOG 4-5  
Add a New Form Type window, CMS 4-36  
Add button, CMS 1-21  
Billing Information, CMS 1-13  
billing meter  
Add Profile button, CMS 1-21  
Administration pull-down menu, CMS 1-13  
Administrator Mode, CMS 4-2  
Advanced Customer Training (ACT), IPG B-3, PRM  
7-2  
Advanced Function Image and Graphics (AFIG),  
SOG 1-1  
AFIG (Advanced Function Image and Graphics), IPG  
1-1  
AFP environment, SOG 1-5  
AFP1 printer definition, IPG D-2  
AIX  
parameters, IPG E-25IPG E-27  
AIX environment  
reading, IPG 8-4  
reporting, IPG 8-4  
BIN command, SOG 1-11  
Bin Group field, CMS 4-18  
Bin Selection Mode pull-down menu, CMS 4-52  
Bin Unload button, PRM 2-2, SOG 4-11  
binding, IPG 1-6  
bins, PRM 2-1PRM 2-3  
Bins display field, CMS 1-16  
Brightness control thumbwheel, SOG 4-5  
bus and tag  
cabling, IPG 2-10  
channel connection, IPG 1-2  
bus and tag cable input, SOG 2-5  
bus and tag cables, SOG 1-4  
bus and tag option, CMS 3-3, CMS 3-4  
buttons  
channel-attaching to an RS/6000, IPG D-5  
configuring InfoPrint Manager, IPG D-5, IPG E-26  
configuring PSF/6000, IPG D-5, IPG E-26  
CMS = Guide to Configuring and Managing the System  
IPG = Installation Planning Guide  
PRM = Guide to Performing Routine Maintenance  
SOG = System Overview Guide  
TRB = Troubleshooting Guide  
MASTER INDEX FOR MODEL 96/4635/180 IPS  
 
INDEX-1  
INDEX  
incremental spin, CMS 1-5  
IPS main window  
cleaning  
4mm cartridge tape drive, PRM 6-7  
Reset Now, CMS 1-22  
Save, CMS 1-22  
keyboard, PRM 6-1  
mirror, PRM 6-3  
PQA, CMS 4-19  
monitor, PRM 6-1  
using, CMS 1-5  
bypass connectors, SOG 2-5  
bypass transport  
Printer Controller exterior, PRM 6-1  
reflective surfaces, PRM 6-1  
sensors  
description, IPG 3-6  
Q1011, PRM 6-3  
dimensions, IPG 6-13  
Q1106, PRM 6-5  
option, IPG 1-6, SOG 1-14  
paper path, IPG 6-15, SOG 4-18  
programmable, SOG 4-14  
service access, IPG 6-14  
specifications, IPG 6-12IPG 6-16, IPG 6-31  
bypass transport, clearing paper jams, TRB 3-21–  
TRB 3-22  
Q1107, PRM 6-4  
Q1164, PRM 6-6  
Q1166, PRM 6-5  
Q850, PRM 6-2  
cleaning supplies, IPG A-21, SOG A-22  
Clear button, SOG 4-5  
clearance space, IPG 6-7, IPG 6-20IPG 6-23  
clearing  
feeder trays, TRB 3-2TRB 3-3  
paper jams  
C
cables  
bypass transport, TRB 3-21TRB 3-22  
steps, TRB 3-7  
bus, IPG 2-10  
IBM channel, IPG 7-2  
CMC7 fonts, SOG 5-1  
locations, IPG 7-2  
CMC7 series, IPG 1-8  
tag, IPG 2-10  
communicating, host computer, CMS 2-5CMS 2-6  
components  
Cancel Job button, CMS 1-20  
carbonless paper, IPG A-3, SOG A-3  
cartridge tape  
base, IPG 2-1IPG 2-10  
controller, IPG 2-1  
drive, IPG 2-3, IPG 2-6, IPG 5-9  
ordering, IPG A-13, SOG A-13  
cartridge tape drive, SOG 2-4  
CD, removing, CMS 2-8  
CD-ROM drive, IPG 2-3, IPG 2-5, SOG 2-4  
central processing unit, IPG 2-2, IPG 2-5  
channel attachments, IPG D-1IPG D-3, IPG D-6  
channel communications board, SOG 2-1  
channel interface, selecting, CMS 3-4  
Channel Mode pull-down menu, CMS 3-4  
Channel Options window, CMS 3-4  
channel-attached  
printer, IPG 3-1IPG 3-3, SOG 4-2SOG 4-6  
Printer Controller, SOG 2-1SOG 2-5  
printer controller, IPG 2-1IPG 2-10  
conditioning paper, IPG A-10IPG A-11, SOG A-10–  
SOG A-11  
configuration  
changes requiring reboot, CMS 3-1  
input specifying, CMS 4-28CMS 4-47  
options, IPG 3-6IPG 3-8  
output specifying, CMS 4-49CMS 4-62  
printer, IPG 3-4IPG 3-5  
configuration files  
cables, IPG 7-2  
backing up, CMS 1-13  
configuration, IPG 1-3  
systems, IPG 2-10  
backing up and restoring, CMS 4-63  
restoring, CMS 1-13  
Check Performance Guarantee, SOG 5-2  
checking  
configuration files, version identifier, SOG 1-15  
Configuration pull-down menu, CMS 1-11, CMS 4-6–  
CMS 4-14  
feeder trays, PRM 1-1  
high-capacity stacker (HCS) bins, PRM 2-2  
purge trays, PRM 2-1  
connectivity boards, IPG 2-1, IPG 2-4, SOG 2-3  
conprt utility, CMS 4-23  
sample trays, PRM 2-1  
checklist  
consumable supplies table, IPG A-15IPG A-21,  
SOG A-15SOG A-22  
installation planning, IPG 4-4IPG 4-6  
supplies, IPG A-25IPG A-26, SOG A-25SOG  
A-26  
Continue button, CMS 1-20, SOG 4-5  
Continue button, no response, TRB 6-1  
continuous form emulation, CMS 1-11  
CMS = Guide to Configuring and Managing the System  
IPG = Installation Planning Guide  
PRM = Guide to Performing Routine Maintenance  
SOG = System Overview Guide  
TRB = Troubleshooting Guide  
INDEX-2  
MASTER INDEX FOR MODEL 96/4635/180 IPS  
 
INDEX  
continuous form jobs, SOG 1-14  
control panel  
Document Feeding and Finishing Architecture, see  
DFA  
HCF feeder tray, SOG 4-9  
documentation  
HCS bin, SOG 4-11  
AIX, IPG E-27  
Control Unit Configuration section, CMS 1-18  
Control Unit display, CMS 1-19  
Copy Subgroup level, SOG 1-11  
customer education, PRM 7-3  
customer responsibilities, IPG 4-2IPG 4-3, IPG 8-2  
Customer Transfer Assist Blade, SOG 5-2  
AS/400, IPG E-24  
IBM, IPG C-2  
IBM channel connections, IPG 7-2  
MVS references, IPG E-17  
OS/2, IPG E-35  
Xerox, IPG C-1  
double-byte fonts, SOG 1-14  
drives  
D
cartridge tape, IPG 2-3, IPG 2-6, IPG 5-9  
CD-ROM, IPG 2-3, IPG 2-5  
disk, IPG 2-2, IPG 2-5  
damaged printing, correcting, TRB 4-1  
dash symbol, SOG 5-3  
data cables, IPG 7-1  
Data Control Interface Module (DCIM2) card, IPG 2-1,  
IPG 2-4, SOG 2-3  
drives, cartridge tape, SOG 2-4  
dropdown lists, CMS 1-3  
dry ink  
data streams, SOG 1-1, SOG 1-5  
data streams, interpolated, IPG 1-5  
debug level, CMS 1-12  
debug level, setting, CMS 4-24  
decurler lever, adjusting, TRB 3-24  
Default Trace File Name window, CMS 4-21  
definitions, see sample printer definitions  
Delete button, CMS 1-21  
delivery requirements, IPG 6-24IPG 6-28  
Delivery Signal Duration field, CMS 4-61  
Delivery Signal Start Adjust field, CMS 4-61  
Delivery Signal Type field, CMS 4-61  
DELTA configurations, IPG 6-4  
developer, IPG A-12, IPG A-21, SOG A-12, SOG  
A-22  
adding, PRM 4-1PRM 4-3  
stains, PRM 4-3  
toner, IPG A-12, IPG A-21, SOG A-12, SOG A-22  
waste bottle, IPG A-21, SOG A-22  
Dual Mode, CMS 3-16, IPG 1-6, SOG 1-1  
duplex  
maximum simplex, CMS 1-11  
mode, simplex page value, CMS 4-8  
printing, selecting, CMS 4-30  
duplex, simplex flexibility, SOG 1-12  
E
E13B fonts, SOG 5-1  
E13B series, IPG 1-8  
devices, input enablement, IPG 6-20  
DFA, CMS 1-21, SOG 1-14, SOG 4-14  
DFA Profile pull-down menu, CMS 4-53  
DFA profiles, CMS 4-62  
Edit the Media Defaults window, CMS 4-39  
education, customer, PRM 7-3  
electrical specifications, IPG 5-1IPG 5-2, IPG 6-1–  
IPG 6-5  
Diagnostic Authorization, CMS 1-13  
Diagnostic Authorization string, entering, CMS 3-14  
diagnostic tools, IPG 1-8  
diagnostic tracing, CMS 1-12  
diagnostics  
entering authorization string, CMS 3-14  
Diagnostics pull-down menu, CMS 1-12, CMS 4-15  
dimension gauge, SOG 5-4  
End of Set field, CMS 1-17  
Enhanced Diagnostics option, CMS 1-13  
environmental requirements, IPG 6-6  
error condition, restarting printer, TRB 6-3  
Ethernet, CMS 2-5, CMS 3-5, IPG 2-1, IPG 2-4, SOG  
2-3  
configurations using, IPG 1-2  
requirements, IPG 4-7  
dimensions  
extraction color, CMS 1-11  
bypass transport, IPG 6-13  
controller, IPG 5-9  
F
printers, IPG 6-7IPG 6-11  
diskette, ejecting, CMS 2-8  
diskettes, IPG A-13, IPG A-21, SOG A-13, SOG A-22  
display monitor, IPG 2-3, IPG 5-9  
Fault icon, SOG 4-5  
Fault List  
icon, TRB 2-1, TRB 6-1  
screen, TRB 2-1TRB 2-2  
CMS = Guide to Configuring and Managing the System  
IPG = Installation Planning Guide  
PRM = Guide to Performing Routine Maintenance  
SOG = System Overview Guide  
TRB = Troubleshooting Guide  
MASTER INDEX FOR MODEL 96/4635/180 IPS  
 
INDEX-3  
INDEX  
Fault List icon, SOG 4-4  
faults, masking, TRB 2-1TRB 2-2  
features  
GOCA (Graphics Object Content Architecture), SOG  
1-5  
graphical user interface, see GUI  
Guarded Tools icon, SOG 4-5  
GUI, CMS 1-1CMS 1-9, SOG 3-2SOG 3-3  
guidelines, loading paper, PRM 1-2  
600 dpi resolution, IPG 1-5  
advanced paper handling, IPG 1-4  
bypass transport option, IPG 1-6  
input trays, IPG 1-4  
output bins, IPG 1-6  
H
roll feeder, IPG 1-4  
hard disk, SOG 2-3  
hardware  
feed belt, cleaning, TRB 3-4TRB 3-5  
feeder trays, IPG 1-4, PRM 1-1PRM 1-9, SOG 1-6  
described, SOG 4-8SOG 4-9  
high-capacity, SOG 4-7  
feeder trays, clearing faults, TRB 3-2TRB 3-3  
feeder trays, current configuration, CMS 1-14  
feeder/stacker  
configuration, IPG 3-4IPG 3-5  
controller components, IPG 2-1, IPG 5-9  
printer components, IPG 6-29IPG 6-31  
specifications, IPG 5-9IPG 5-10, IPG 6-29IPG  
6-31  
supported, IPG 6-12  
hardware features, SOG 1-6  
HCF feeder trays  
capacities, SOG 4-9  
control panel, SOG 4-9  
HCU, IPG 2-1, IPG 2-10, IPG 5-8, IPG 5-9, SOG 2-1,  
SOG 2-5  
HCU errors, TRB 3-8  
HCU, powering on, CMS 2-2  
HFSI (high frequency service indicator), CMS 1-1,  
SOG 3-2  
high-capacity feeder, SOG 4-7  
high-capacity stacker, SOG 4-7, SOG 4-10SOG  
4-11  
configurations, IPG 3-4IPG 3-5  
number, IPG 3-8  
options, IPG 3-6IPG 3-9  
space requirements, IPG 6-7IPG 6-11  
specifications, IPG 6-29IPG 6-31  
feeder/stacker module, SOG 4-7  
file pull-down menus, CMS 1-3  
finishing attributes, CMS 4-55  
Finishing field, CMS 1-17  
Finishing Function field, CMS 4-60  
Finishing Function Option field, CMS 4-18  
finishing options, IPG 3-6IPG 3-9  
floor leveling, IPG 6-24  
fonts  
high-capacity stacker (HCS) bins, PRM 2-2  
high-speed transfer mode, CMS 3-4  
Hint icon, SOG 4-5, TRB 2-1  
Host Channel Unit, see HCU  
Host Channel Unit, see HCU  
host computer, communicating, CMS 2-5CMS 2-6  
Host Job Control section, CMS 1-20  
HPPCL5e, IPG 1-6  
converting, IPG 1-5  
MICR  
CMC7 series, IPG 1-8  
E13B series, IPG 1-8  
fonts, MICR  
CMC7 fonts, SOG 5-1  
E13B fonts, SOG 5-1  
fonts, resident, CMS 1-11, SOG 1-15  
adding, CMS 3-10  
Human Readable Interpretation (HRI), SOG 1-15  
displaying, CMS 3-9  
friction-type feeders, PRM 1-2  
fuser  
I
IBM AFP architecture, IPG 1-1  
IBM AFP Group 3 page printer, SOG 1-1  
IBM IPDS Group 3 page printer, IPG 1-1  
IBM, outline fonts, SOG 1-15  
icons, moving, CMS 1-6  
agent, IPG A-12, IPG A-21, SOG A-12, SOG  
A-22  
shield, IPG A-12, IPG A-21, SOG A-12, SOG  
A-22  
fuser agent  
adding, PRM 3-1PRM 3-4  
fuser power saver, SOG 4-15  
IEEE  
802.3, IPG 4-7  
images, full-page 600 dpi, SOG 1-14  
In Use indicator, SOG 4-11  
incremental spin buttons, CMS 1-5  
ink, dry, IPG A-21, SOG A-22  
G
glazing, TRB 3-4  
CMS = Guide to Configuring and Managing the System  
IPG = Installation Planning Guide  
PRM = Guide to Performing Routine Maintenance  
SOG = System Overview Guide  
TRB = Troubleshooting Guide  
INDEX-4  
MASTER INDEX FOR MODEL 96/4635/180 IPS  
 
INDEX  
input configuration  
IPS software license text string, loading, CMS 3-12–  
CMS 3-13  
changing, CMS 4-46  
creating, CMS 4-40CMS 4-45  
deleting, CMS 4-47  
ISO specifications, IPG 1-7  
example, CMS 4-29  
J
Input Configuration section, CMS 1-14CMS 1-15,  
CMS 4-28  
input enablement  
jam clearance assistance, SOG 4-15  
JCL keyword, SOG 1-11  
JES2  
kit, SOG 4-14  
FSS statement parameters, IPG E-3IPG E-4  
Initialization Dataset commands example, IPG  
E-4  
paper path, SOG 4-17  
input enablement devices, IPG 6-20  
input tray, capabilities, SOG 1-11  
input trays, IPG 1-4, SOG 1-6  
input trays, configuring, CMS 1-14  
input trays, loading, PRM 1-1PRM 1-9  
installation  
printer definitions, IPG D-1  
JES3  
configuring, IPG E-4  
FSS statement parameters, IPG E-5IPG E-6  
initialization dataset commands example, IPG  
E-6  
planning checklist, IPG 4-4IPG 4-6  
preparation, IPG 4-1IPG 4-7  
process, IPG 8-1  
job integrity, checking after paper jam, TRB 3-8  
Xerox responsibilities, IPG 4-1  
instruction labels, SOG 4-15  
interface, CMS 1-11  
inverter feeder/stacker, IPG 3-1, IPG 3-4, IPG 3-7,  
IPG 3-9  
K
keyboard, IPG 2-4, IPG 2-7, IPG 5-10, SOG 2-4  
keyboard, cleaning, PRM 6-1  
inverter feeder/stacker module, SOG 4-7  
IOCA (Image Object Content Architecture), SOG 1-5  
IOCA Replicate and Trim, SOG 1-12  
IOT (Image Output Terminal), see printer  
IPDS bins, CMS 1-16  
L
labels  
selecting, IPG A-2, SOG A-2  
language, CMS 1-11  
Language icon, SOG 4-4  
language, messages, SOG 1-15  
length guide, PRM 1-5  
leveling, floor, IPG 6-24  
License Status, CMS 1-13  
license, software, SOG 1-17  
licensing, software, IPG 8-3  
lights, feeder trays, PRM 1-1  
loading  
IPDS data streams, CMS 3-16, IPG 1-6, SOG 1-1,  
SOG 1-5  
IPDS Trays field, CMS 1-15, CMS 4-43  
IPS Authorization, CMS 1-13  
IPS console window, IPG 2-9  
IPS Engine Monitor window, CMS 1-1, SOG 3-2  
IPS main window, IPG 2-9  
buttons, CMS 1-21CMS 1-22  
components, CMS 1-9CMS 1-22, SOG 3-4–  
SOG 3-5  
described, CMS 1-1, SOG 3-2  
description, SOG 1-2, SOG 1-10  
Host Job Control section, CMS 1-20  
menus, CMS 1-10CMS 1-14  
setup and status information, CMS 1-18CMS  
1-19  
paper, PRM 1-2  
trays 1 and 2, PRM 1-3PRM 1-6  
trays 3,4,5, and 6, PRM 1-7PRM 1-9  
loading, feeder trays, PRM 1-1PRM 1-9  
logging, service call, CMS 1-12  
M
using, CMS 1-9  
IPS mode, switching, CMS 3-16  
IPS Output Configuration window, CMS 4-51  
IPS Print Engine Monitor window, CMS 2-6  
IPS print engine monitor window, IPG 2-9  
IPS Print Service Console window, CMS 1-1, SOG  
3-2  
magnetic ink character recognition see MICR  
maintenance  
ongoing, IPG 8-4  
routine, IPG 8-4  
maintenance services, PRM 7-1PRM 7-4  
mapping IPDS bins, CMS 1-16  
IPS screen, IPG 2-9  
CMS = Guide to Configuring and Managing the System  
IPG = Installation Planning Guide  
PRM = Guide to Performing Routine Maintenance  
SOG = System Overview Guide  
TRB = Troubleshooting Guide  
MASTER INDEX FOR MODEL 96/4635/180 IPS  
 
INDEX-5  
INDEX  
mapping IPDS input trays, CMS 4-43  
margin values, CMS 4-31  
masking faults, TRB 2-1TRB 2-2  
maximum simplex, CMS 1-11  
Maximum Simplex window, CMS 4-8  
media defaults, editing, CMS 4-38  
media icon  
MICR Position and Dimension Gauge, SOG 5-4  
Minimum Set Time field, CMS 4-59  
misfeeds, frequent, TRB 3-4TRB 3-5  
mixed paper sizes, printing on, SOG 1-11  
mixed plex, SOG 1-12  
mixed plex feature, IPG 1-5  
MO:DCA-P (Mixed Object Document Content  
Architecture for Presentation, SOG 1-5  
Mode field, CMS 4-18  
changing, CMS 4-38  
creating, CMS 4-33CMS 4-37  
deleting, CMS 4-38  
modem  
Media Library window, CMS 4-33  
Media Library, setting up, CMS 4-32CMS 4-38  
Media Type window, CMS 4-34  
Media Units  
enable and disable, TRB 1-2  
modem, enable or disable, CMS 1-11, CMS 3-6, SOG  
1-17  
modes, switching, CMS 3-16  
specifying size units, CMS 4-12  
specifying weight units, CMS 4-12  
media units  
monitor, IPG 2-3, IPG 5-9, SOG 2-4  
monitor, blank display, TRB 6-1  
monitor, cleaning, PRM 6-1  
specifying, CMS 1-11  
menus  
monthly print volume, IPG 1-3, SOG 1-3  
mouse, IPG 2-4, IPG 2-8, IPG 5-10, SOG 2-4  
MVS  
Administration, CMS 1-13  
Bin Selection Mode, CMS 4-52  
Channel Mode, CMS 3-4  
Configuration, CMS 1-11, CMS 4-6CMS 4-14  
DFA Profile, CMS 4-53  
channel attachment, IPG D-1IPG D-3  
TCP/IP connection, IPG E-1IPG E-17  
N
Diagnostics, CMS 1-12, CMS 4-15  
System Options, CMS 1-14, CMS 4-27  
Trace Mode Options, CMS 4-21  
messages  
network configurations  
AIX, IPG E-26  
AS/400, IPG E-18  
MVS, IPG E-2  
area, SOG 4-6  
OS/2, IPG E-28  
HFSI, CMS 1-1, SOG 3-2  
translation, SOG 1-15  
meter readings, displaying, CMS 1-13  
meter, billing  
reading, IPG 8-4  
reporting, IPG 8-4  
MICR  
network interface requirements, IPG 4-7  
NPS mode, switching, CMS 3-16  
null modem connection, CMS 1-12  
Number of Sets field, CMS 4-18  
Number of Sheets field, CMS 4-18  
N-Up, enhanced, SOG 1-13  
comparator with MICR grid, IPG A-14, SOG 5-4,  
SOG A-14  
O
dry ink, IPG A-12, IPG A-21, SOG A-12, SOG  
A-22  
fonts, IPG 1-8, SOG 5-1  
line, IPG 1-7  
output, readability, SOG 5-3  
Positioning and Dimension Gauge, IPG A-14,  
SOG A-14  
OCA colors, SOG 1-13  
Offline field, CMS 4-21  
offline, taking, CMS 1-14, CMS 2-5, CMS 4-27  
Online field, CMS 4-21  
online, placing, CMS 1-14, CMS 2-5  
On-Us symbol, SOG 5-3  
operating systems supported, IPG 1-1  
Operator Mode, CMS 4-2  
operator training, PRM 7-2  
printing features, SOG 5-1SOG 5-2  
MICR Clear Band, SOG 5-3  
MICR Grid, SOG 5-4  
optical mouse, SOG 2-4  
MICR line, SOG 5-3  
optional processing parameters  
setting, CMS 1-11  
Optional Processing Parameters window, CMS 4-14  
options, IPG 3-6IPG 3-8  
MICR mode, CMS 1-11, CMS 1-18  
MICR Mode screen, SOG 5-2  
MICR Mode Selection window, CMS 4-11  
MICR mode, selecting, CMS 4-11  
CMS = Guide to Configuring and Managing the System  
IPG = Installation Planning Guide  
PRM = Guide to Performing Routine Maintenance  
SOG = System Overview Guide  
TRB = Troubleshooting Guide  
INDEX-6  
MASTER INDEX FOR MODEL 96/4635/180 IPS  
 
INDEX  
ordering supplies, IPG A-22, SOG A-23  
OS/2  
examples, IPG D-4IPG D-5  
parameters, IPG E-28IPG E-35  
OS/390, see MVS  
outlets, power configurations, IPG 5-2, IPG 6-2  
outline fonts, SOG 1-15  
output bins, IPG 1-6, SOG 1-11  
output configuration  
path, bypass transport, IPG 6-15  
performance guides, SOG B-1  
predrilled, PRM 1-2  
preprinted, PRM 1-2  
recommended weight, grade, IPG A-1, SOG A-1  
selecting, IPG A-1IPG A-3, SOG A-1SOG A-3  
size, IPG 6-12, IPG A-1, SOG A-1  
sizes, IPG A-3IPG A-8, SOG A-3SOG A-8  
storing, IPG A-9, SOG A-9  
changing, CMS 4-57  
creating, CMS 4-51CMS 4-54  
deleting, CMS 4-57  
supplies, IPG A-15IPG A-20, SOG A-15SOG  
A-21  
trays, see trays  
DFA profile  
types, TRB 3-1  
adding, CMS 4-58CMS 4-61  
changing, CMS 4-62  
deleting, CMS 4-62  
paper feeder assembly, PRM 1-6  
Paper Level indicators, SOG 4-9  
parallel channel interface, CMS 3-4  
parameters, processing, CMS 4-13  
PCI Bus support, SOG 1-16  
example, CMS 4-53  
specifying, CMS 4-49CMS 4-62  
Output Configuration section, CMS 1-16CMS 1-17  
Output Configuration window, SOG 1-11  
Output DFA Profile window, CMS 4-58  
output trays, PRM 2-1PRM 2-3  
overstrike support, SOG 1-13  
PCIM2 card, SOG 2-3  
PCL data streams, CMS 3-16, SOG 1-1  
perforated paper, IPG A-3, SOG A-3  
performance guides, paper, SOG B-1  
personality profiles, CMS 1-21, CMS 4-58CMS 4-61  
personnel, training, IPG 4-3  
pin buttons, CMS 1-8  
P
planning checklist, IPG 4-4IPG 4-6  
Please Wait indicator, SOG 4-9, SOG 4-11  
plex, mixed, SOG 1-12  
PostScript data streams, CMS 3-16, SOG 1-1  
PostScript level 2, IPG 1-6  
pad, IPG 2-8  
Page Order Within Set field, CMS 1-17  
page rotation, SOG 1-14  
Pages Outstanding display, CMS 1-19  
paper  
power  
characteristics, IPG A-2, SOG A-2  
conditioning, IPG A-10IPG A-11, SOG A-10–  
SOG A-11  
cord configurations, IPG 6-3  
requirements, IPG 5-1IPG 5-2, IPG 5-9, IPG  
6-1IPG 6-5, IPG 6-29IPG 6-31  
savers, SOG 4-15  
curl, TRB 3-23  
adjusting, TRB 3-24  
supply, SOG 2-5  
measuring, TRB 3-23  
power outage, CMS 2-5  
feed direction, IPG A-6IPG A-8, SOG A-6SOG  
A-8  
handling, advanced, IPG 1-4  
jams, TRB 3-23  
power saver mode, exiting, CMS 2-7  
powering off, CMS 2-3CMS 2-5  
powering on, CMS 2-1CMS 2-2  
power-saver timeout mode, CMS 3-7  
PQA button, CMS 4-19  
jams, clearing  
bypass transport, TRB 3-21TRB 3-22  
checking job integrity, TRB 3-8  
steps, TRB 3-7  
PQA status window, CMS 4-19  
precut paper, IPG A-3, SOG A-3  
predrilled paper, IPG A-2, PRM 1-2, SOG A-2  
preprinted paper, IPG A-2, PRM 1-2, SOG A-2  
print job  
loading, PRM 1-2  
ordering, IPG A-15IPG A-21, IPG A-22IPG  
A-23, SOG A-15SOG A-22, SOG A-23–  
SOG A-25  
automatic recovery, CMS 2-7  
starting, CMS 2-6  
path  
print jobs, automatic recovery, TRB 3-8  
print volume, monthly, IPG 1-3, SOG 1-3  
printer  
bypass transport, SOG 4-18  
input enablement, SOG 4-17  
printer, SOG 4-16  
activity, displaying, CMS 1-19  
CMS = Guide to Configuring and Managing the System  
IPG = Installation Planning Guide  
PRM = Guide to Performing Routine Maintenance  
SOG = System Overview Guide  
TRB = Troubleshooting Guide  
MASTER INDEX FOR MODEL 96/4635/180 IPS  
 
INDEX-7  
INDEX  
attention  
alarm, IPG 3-1  
light, IPG 3-1  
components, IPG 3-1IPG 3-3  
configuration options, IPG 3-6IPG 3-9  
configurations, IPG 3-4IPG 3-5  
control console, IPG 3-2IPG 3-3  
defining, IPG 8-3  
dimensions, IPG 6-7IPG 6-11  
installation, IPG 8-1  
IPDS bins, mapping, CMS 1-16  
maintenance, IPG 8-4  
processor  
CD-ROM drive, SOG 2-4  
described, SOG 2-3SOG 2-4  
hard disk, SOG 2-3  
rebooting, CMS 2-7  
setting up, CMS 3-1CMS 3-16  
printer controller  
components, IPG 2-1IPG 2-10  
placement, IPG 5-3IPG 5-8  
power requirements, IPG 5-9IPG 5-10  
space requirements, IPG 5-3IPG 5-8  
Printer Controller exterior, cleaning, PRM 6-1  
Printer icon, SOG 4-4  
performance  
AS/400, IPG E-24  
MVS, IPG E-16  
OS/2, IPG E-34IPG E-35  
pinging  
printer tray cells, CMS 4-42  
Printer Tray field, CMS 4-18  
Printer Trays field, CMS 1-15, CMS 4-41  
printers  
AS/400, IPG E-22IPG E-24  
MVS, IPG E-14IPG E-15  
OS/2, IPG E-32IPG E-33  
placement, IPG 6-7  
power requirements, IPG 6-29IPG 6-31  
purge tray, IPG 3-1  
capabilities, SOG 1-1  
components, SOG 4-2SOG 4-6  
attention light, SOG 4-6  
feeder/stacker module, SOG 4-7  
high-capacity feeder trays, SOG 4-7  
high-capacity stacker, SOG 4-7, SOG 4-10–  
SOG 4-11  
queues  
PSF/2, defining, IPG E-31IPG E-32  
resuming, CMS 2-7  
sample definitions  
inverter feeder/stacker module, SOG 4-7  
printer control console, SOG 4-3, SOG 4-3–  
SOG 4-6  
MVS with channel attachment, IPG D-1IPG  
D-3  
processor feeder trays, SOG 4-2, SOG 4-7  
purge tray, SOG 4-6  
MVS with TCP/IP connection, IPG E-1IPG  
E-17  
OS/2 with channel attachment, IPG D-4IPG  
D-5  
sample tray, SOG 4-6  
configurations, SOG 4-12SOG 4-13  
description, SOG 1-2  
paper jam areas, TRB 3-9TRB 3-20  
paper path, SOG 4-16  
restarting, TRB 6-3  
VM with channel attachment, IPG D-6  
VSE with channel attachment, IPG D-6  
sample tray, IPG 3-1  
printing  
stacker trays, configuring, CMS 1-16  
status, CMS 2-6  
stopping, CMS 2-6  
pages remaining display, CMS 1-19  
samples, CMS 4-15CMS 4-19  
test patterns, CMS 4-15  
throughput speed, IPG 6-12, IPG A-3IPG A-4,  
SOG A-3SOG A-4  
printing test jobs  
OS/2, IPG E-33  
Printer Bins display field, CMS 1-16  
printer control console  
components, SOG 4-3SOG 4-6  
described, SOG 4-3  
Printer Controller  
privilege mode, CMS 4-2  
Administrator Mode, CMS 4-2  
changing, CMS 1-13, CMS 4-3, CMS 4-4  
display on main window, CMS 1-18  
Operator Mode, CMS 4-2  
Service Mode, CMS 4-2  
components, SOG 2-1SOG 2-5  
HCU, SOG 2-1  
User Mode, CMS 4-2  
Sun UltraSPARC workstation, SOG 2-1  
description, SOG 1-2  
privilege modes, SOG 1-16  
procedures  
keyboard, SOG 2-4  
monitor, SOG 2-4  
mouse, SOG 2-4  
4mm cartridge tape drive, cleaning, PRM 6-1  
channel connection, switching, CMS 3-3CMS  
3-5  
CMS = Guide to Configuring and Managing the System  
IPG = Installation Planning Guide  
PRM = Guide to Performing Routine Maintenance  
SOG = System Overview Guide  
TRB = Troubleshooting Guide  
INDEX-8  
MASTER INDEX FOR MODEL 96/4635/180 IPS  
 
INDEX  
channel interface, selecting, CMS 3-4  
debug level, setting, CMS 4-24  
DFA profiles  
trays 3, 4, 5, and 6, loading, PRM 1-7PRM 1-9  
updating software  
from CD, CMS 4-25  
changing, CMS 4-62  
creating, CMS 4-58CMS 4-61  
deleting, CMS 4-62  
from diskette, CMS 4-25  
remotely, CMS 4-26  
processing parameters, setting, CMS 4-13  
processor, IPG 2-2, IPG 2-5, IPG 5-9  
processor feeder trays, SOG 4-2, SOG 4-7  
program temporary fixes, see PTFs  
programmable bypass transport, see bypass  
transport  
dry ink  
waste container, replacing, PRM 5-1PRM  
5-3  
dry ink, adding, PRM 4-1PRM 4-3  
duplex mode  
specifying simplex value, CMS 4-8, CMS  
4-12  
PSF  
handshaking, IPG 2-10  
feed belt, cleaning, TRB 3-4TRB 3-5  
fuser agent, adding, PRM 3-1PRM 3-4  
host jobs, printing, CMS 2-6  
input configuration  
printer definitions, IPG D-1  
PSF compatibility, SOG 1-1  
PSF/2, defining printer, IPG E-30IPG E-31  
PSF/MVS  
changing, CMS 4-46  
configuring, IPG E-7  
creating, CMS 4-40CMS 4-45  
deleting, CMS 4-47  
IPS mode, switching, CMS 3-16  
media icon  
PRINTDEV statement example, IPG E-11  
PRINTDEV statement parameters, IPG E-7IPG  
E-10  
PT2 Subset, SOG 1-13  
changing, CMS 4-38  
PTFs, IPG E-25  
creating, CMS 4-33CMS 4-37  
deleting, CMS 4-38  
memory allocation, changing, CMS 3-8  
MICR mode, selecting, CMS 4-11  
NPS mode, switching, CMS 3-16  
output configuration  
PTOCA (Presentation Text Object Content  
Architecture), SOG 1-5, SOG 1-13  
publications, related, see documentation  
pull-down menus  
selecting  
click method, CMS 1-4  
changing, CMS 4-57  
drag method, CMS 1-4  
creating, CMS 4-51CMS 4-54  
deleting, CMS 4-57  
types, CMS 1-3  
purge tray, SOG 4-6  
paper trays, clearing misfeeds, TRB 3-2TRB 3-3  
personality profiles  
purge trays, PRM 2-1  
deleting, CMS 4-62  
Q
powering off, CMS 2-4  
Q1011 sensor and mirror, cleaning, PRM 6-3  
Q1106 sensor, cleaning, PRM 6-5  
Q1107 sensor, cleaning, PRM 6-4  
Q1107A sensor, TRB 3-20  
Q1164 sensor, cleaning, PRM 6-6  
Q1166 sensor, cleaning, PRM 6-5  
Q850 sensor, cleaning, PRM 6-2  
Quit buttons, CMS 1-21  
powering on, CMS 2-2  
Printer Controller, rebooting, CMS 2-7  
printers, restarting, TRB 6-3  
resolution, specifying input, CMS 4-7  
sample files, printing, CMS 4-15CMS 4-18  
sensors, cleaning  
Q1011, PRM 6-3  
Q850, PRM 6-2  
stacker bins, unloading, PRM 2-2PRM 2-3  
TCP/IP  
R
selecting, CMS 3-5  
switching, CMS 3-3CMS 3-5  
trace  
raster output scanner (ROS) power saver, SOG 4-15  
Ready To Open indicator, TRB 3-2  
Ready to Open indicator, PRM 1-3, SOG 4-9  
Ready to Unload indicator, PRM 2-2, SOG 4-11  
Recovery Control field, CMS 4-60  
capturing, CMS 4-20CMS 4-22  
executing captured, CMS 4-22  
printing, CMS 4-23  
reflected light, MICR comparator, SOG 5-4  
trays 1 and 2, loading, PRM 1-3PRM 1-6  
CMS = Guide to Configuring and Managing the System  
IPG = Installation Planning Guide  
PRM = Guide to Performing Routine Maintenance  
SOG = System Overview Guide  
TRB = Troubleshooting Guide  
MASTER INDEX FOR MODEL 96/4635/180 IPS  
 
INDEX-9  
INDEX  
reflective surfaces, cleaning, PRM 6-1  
registration transport roll levers, adjusting, TRB 4-1  
remote service, SOG 1-17, TRB 1-2  
Reporting billing meters, PRM 7-3  
requirements  
samples, printing, CMS 1-12, CMS 4-15CMS 4-19  
Save button, CMS 1-22  
SCSI cartridge tape drive, IPG 2-3, IPG 2-6  
selecting  
labels, IPG A-2, SOG A-2  
see also specifications  
paper  
clearance space, IPG 6-20IPG 6-23  
delivery access, IPG 6-24IPG 6-28  
environmental, IPG 6-6  
Ethernet, IPG 4-7  
network interface, IPG 4-7  
characteristics, IPG A-2, SOG A-2  
size, IPG A-1IPG A-3, SOG A-1SOG A-3  
transparencies, IPG A-2, SOG A-2  
selecting MICR mode, CMS 4-11  
sensors, cleaning  
power, IPG 5-1IPG 5-2, IPG 5-9, IPG 6-1IPG  
6-5, IPG 6-29IPG 6-31  
methods, PRM 6-1  
Q1011, PRM 6-3  
printer controller space, IPG 5-3IPG 5-8  
space, IPG 5-3, IPG 6-7, IPG 6-20IPG 6-28  
Token Ring, IPG 4-7  
Q1106, PRM 6-5  
Q1107, PRM 6-4  
Q1166, PRM 6-5  
Reset button, CMS 1-22  
Q850, PRM 6-2  
Reset Now button, CMS 1-22  
resident fonts, CMS 1-11, SOG 1-15  
adding, CMS 3-10  
service  
telephone number, IPG B-1  
Xerox responsibilities, IPG 4-2  
service call, logging, CMS 1-12  
service call, required information, TRB 1-1  
Service Mode, CMS 4-2  
displaying, CMS 3-9  
resolution, CMS 1-11, CMS 4-6, IPG 1-5  
MICR, 300/600 dpi, SOG 5-2  
Resolution display, CMS 1-18  
Resolution window, CMS 4-6  
Resource Limits, CMS 1-11  
responsibilities  
service mode, CMS 1-12  
service telephone number, PRM 7-1  
Set Jam Time field, CMS 4-60  
setup information, CMS 1-18CMS 1-19  
shared space, IPG 6-20, IPG 6-20IPG 6-23  
Sheet Exit to EndofSet Time field, CMS 4-61  
Sheet Jam Time field, CMS 4-60  
shutdown system, CMS 1-14  
silicone, PRM 3-2  
customer, IPG 4-2IPG 4-3  
installation  
customer, IPG 8-2  
Xerox, IPG 8-2  
Xerox, IPG 4-1IPG 4-2  
restoring configuration files, CMS 1-13, CMS 4-63  
RISC processor chipset, SOG 2-1  
RISC-based controller, IPG 1-1  
roll feeder, IPG 1-4  
simplex  
maximum duplex, CMS 1-11  
mode, specifying value maximum, CMS 4-8  
printing, selecting, CMS 4-30  
simplex, duplex flexibility, SOG 1-12  
single-tag interlock mode, CMS 3-4  
site  
Rotation display, CMS 1-18  
S
personnel, customer responsibility, IPG 4-2  
preparation, customer responsibility, IPG 4-2  
selection, Xerox responsibilities, IPG 4-1  
Sixth Sense feature, IPG B-2  
Sixth Sense Technology, SOG 1-17, TRB 1-2  
disabling a modem, TRB 1-3  
enabling a modem, TRB 1-3  
remote service, TRB 1-2  
size units, specifying, CMS 4-12  
skewed printing, correcting, TRB 4-1  
slumber mode timer, CMS 1-11, CMS 3-7  
SMM Value for Finishing Function field, CMS 4-60  
software  
S/370 bus, IPG 2-10  
saddle-stitching, IPG 1-6  
Sample button, SOG 4-5  
Sample File field, CMS 4-16  
sample printer definitions  
MVS with channel attachment, IPG D-1IPG D-3  
MVS with TCP/IP connection, IPG E-1IPG E-17  
OS/2 with channel attachment, IPG D-4IPG D-5  
VM with channel attachment, IPG D-6  
VSE with channel attachment, IPG D-6  
Sample printing window, CMS 4-15  
sample tray, SOG 4-6  
sample trays, PRM 2-1  
features, IPS, SOG 1-11  
CMS = Guide to Configuring and Managing the System  
IPG = Installation Planning Guide  
PRM = Guide to Performing Routine Maintenance  
SOG = System Overview Guide  
TRB = Troubleshooting Guide  
INDEX-10  
MASTER INDEX FOR MODEL 96/4635/180 IPS  
 
INDEX  
licensing, IPG 8-3  
toner, IPG A-12, IPG A-21, SOG A-12, SOG  
A-22  
waste bottle, IPG A-21, SOG A-22  
supported products, SOG 1-5  
Software license, SOG 1-17  
software license text string, loading, CMS 3-12CMS  
3-13  
fuser  
agent, IPG A-12, IPG A-21, SOG A-12, SOG  
A-22  
software prerequisites  
AIX, IPG E-25  
shield, IPG A-12, SOG A-12  
AS/400, IPG E-18  
MVS, IPG E-1  
OS/2, IPG E-28  
MICR tools, IPG A-14, SOG A-14  
paper, IPG A-1IPG A-11, IPG A-15IPG A-20,  
SOG A-1SOG A-11, SOG A-15SOG  
A-21  
software updates  
from CD, CMS 1-12, CMS 4-25  
from diskette, CMS 1-12, CMS 4-25  
remotely, CMS 1-12, CMS 4-26  
space  
supplies table, IPG A-15IPG A-21, SOG A-15SOG  
A-22  
support services, IPG B-1IPG B-4, PRM 7-1PRM  
7-4  
bypass transport, IPG 6-14  
planning guidelines, IPG 6-20  
requirements, IPG 5-3, IPG 6-7, IPG 6-20IPG  
6-28  
system  
changing settings, CMS 1-21  
current configuration, displaying, CMS 1-18  
interface, specifying, CMS 3-3CMS 3-5  
powering off, CMS 2-3CMS 2-5  
powering on, CMS 2-1CMS 2-2  
setting configuration, CMS 4-1CMS 4-65  
shutting down, CMS 1-14  
specifications  
see also requirements  
bypass transport, IPG 6-12IPG 6-16  
controller, IPG 5-1IPG 5-10  
electrical, IPG 5-9, IPG 6-1IPG 6-5, IPG 6-29–  
IPG 6-31  
starting and stopping, CMS 2-1CMS 2-7  
system controller, see Printer Controller  
System Options pull-down menu, CMS 1-14, CMS  
4-27  
printer, IPG 6-1IPG 6-31  
stacker  
high-capacity, SOG 4-7, SOG 4-10SOG 4-11  
stacker problems, TRB 5-1  
stacker trays, configuring, CMS 1-16  
stacker, unloading bins, PRM 2-2PRM 2-3  
status information, CMS 1-18CMS 1-19  
Status section, CMS 1-19  
Statuses Supported field, CMS 4-60  
Stop button, CMS 1-20, SOG 4-5  
subscript support, SOG 1-13  
Sun workstation, SOG 2-2  
Sun workstations, IPG 1-1, IPG 2-1IPG 2-4, IPG  
2-4IPG 2-8, IPG 5-4, IPG 5-6  
superscript support, SOG 1-13  
supplies  
System Resource Limits window, CMS 3-8  
System Shutdown Confirmation window, CMS 2-4  
system unresponsive, TRB 6-1  
T
tab stock, PRM 1-2  
tape drive, IPG 2-3, IPG 2-6, IPG 5-9, SOG 2-4  
TCP/IP, SOG 1-4  
configuration, IPG 1-3  
defining, IPG E-1IPG E-35  
Ethernet interface, IPG 1-2  
MVS  
configuring, IPG E-11  
Profile dataset  
parameters, IPG E-12  
statements example, IPG E-13  
option, CMS 3-3  
cartridge tapes, IPG A-13, SOG A-13  
checklist, IPG A-25IPG A-26, SOG A-25SOG  
A-26  
cleaning, IPG A-21, SOG A-22  
consumable tables, IPG A-15IPG A-21, SOG  
A-15SOG A-22  
developer, IPG A-12, IPG A-21, SOG A-12, SOG  
A-22  
diskettes, IPG A-13, IPG A-21, SOG A-13, SOG  
A-22  
receiving data, CMS 2-5, CMS 3-5  
TCP/IP Interface window, CMS 3-5  
telephone numbers  
service, IPG B-1  
Xerox Parts and Product Support Center, IPG  
A-22, SOG A-23  
dry ink  
test patterns, printing, CMS 4-15  
Testdocs menu, CMS 4-16CMS 4-19  
CMS = Guide to Configuring and Managing the System  
IPG = Installation Planning Guide  
PRM = Guide to Performing Routine Maintenance  
SOG = System Overview Guide  
TRB = Troubleshooting Guide  
MASTER INDEX FOR MODEL 96/4635/180 IPS  
 
INDEX-11  
INDEX  
third party finisher, IPG 3-6  
throughput speed, SOG 1-3  
Time Between Sets field, CMS 4-59  
Time Between Sheets field, CMS 4-59  
Time to Cycle Up field, CMS 4-59  
tinted paper, IPG A-2, SOG A-2  
Token Ring, CMS 2-5, CMS 3-5, IPG 1-2, IPG 2-1,  
IPG 2-4, IPG 4-7, SOG 2-3  
toner, see dry ink  
UltraSPARC workstation, see Sun workstations  
underscore support, SOG 1-13  
United States/Canada, IPG 5-2  
units, specifying (weight, size), CMS 4-12  
unloading  
high-capacity stacker (HCS) bins, PRM 2-2  
purge trays, PRM 2-1  
sample trays, PRM 2-1  
stacker bins, PRM 2-2PRM 2-3  
updates, software  
trace  
capturing, CMS 4-20  
executing, CMS 4-22  
initiating, CMS 4-20CMS 4-22  
options, CMS 1-12  
printing, CMS 4-23  
from CD, CMS 1-12, CMS 4-25  
from diskette, CMS 1-12, CMS 4-25  
remotely, CMS 1-12, CMS 4-26  
updating configuration files, CMS 1-21  
User Mode, CMS 4-2  
Trace display, CMS 1-19  
trace facility, SOG 1-13  
V
Trace Mode Options pull-down menu, CMS 4-21  
Trace Mode Options window, CMS 4-21  
Trace window, CMS 4-21  
training, IPG 4-2, IPG 4-3, IPG 8-1, IPG B-3  
training, operators, PRM 7-2  
Transfer Assist Blade, SOG 5-2  
transit symbols, SOG 5-3  
transmission rate, IPG 1-2  
transmitted light, MICR comparator, SOG 5-4  
transparencies  
vacuum-type feeders, PRM 1-2  
version identifier, configuration files, SOG 1-15  
vertical clearance, IPG 6-7  
VM, IPG D-6  
voltages, requirements, IPG 5-2  
VSE, IPG D-6  
W
waste bottle, dry ink, IPG A-21, SOG A-22  
weight units, specifying, CMS 4-12  
windows  
selecting, IPG A-2, SOG A-2  
transparencies, loading, PRM 1-2  
Tray Unlock button, PRM 1-3, TRB 3-2  
trays  
Add a New Form Type, CMS 4-36  
Ask for File Name, CMS 1-21  
Backup Configuration Files, CMS 4-64  
Channel Options, CMS 3-4  
capacities  
feeder, IPG 1-4, SOG 1-6  
HCF, SOG 4-8  
Default Trace File Name, CMS 4-21  
Edit the Media Defaults, CMS 4-39  
exiting, CMS 1-6  
feeder, SOG 4-8SOG 4-9  
input capabilities, SOG 1-11  
loading  
IPS Engine Monitor, CMS 1-1, SOG 3-2  
IPS main, CMS 1-9, SOG 3-4SOG 3-5  
IPS main, described, CMS 1-1, SOG 3-2  
IPS Output Configuration, CMS 4-51  
IPS Print Engine Monitor, CMS 2-6  
IPS Print Service Console, CMS 1-1, SOG 3-2  
Maximum Simplex, CMS 4-8  
Media Library, CMS 4-33  
1 and 2, PRM 1-3PRM 1-6  
3,4,5, and 6, PRM 1-7PRM 1-9  
loading feeder, PRM 1-1PRM 1-9  
output, PRM 2-1PRM 2-3  
output bins, SOG 1-11  
processor feeder, SOG 4-2, SOG 4-7  
purge, PRM 2-1, SOG 4-6  
sample, PRM 2-1, SOG 4-6  
selecting, SOG 1-11  
Media Type, CMS 4-34  
MICR Mode Selection, CMS 4-11  
moving, CMS 1-6  
trays, stacker, CMS 1-16  
trimming, IPG 1-6  
Optional Processing Parameters, CMS 4-14  
Output DFA Profile, CMS 4-58  
PQA status, CMS 4-19  
turning radius, IPG 6-25IPG 6-28  
U
Resolution, CMS 4-6  
Sample printing, CMS 4-15  
UltraSPARC workstation, SOG 2-1  
CMS = Guide to Configuring and Managing the System  
IPG = Installation Planning Guide  
PRM = Guide to Performing Routine Maintenance  
SOG = System Overview Guide  
TRB = Troubleshooting Guide  
INDEX-12  
MASTER INDEX FOR MODEL 96/4635/180 IPS  
 
INDEX  
System Resource Limits, CMS 3-8  
System Shutdown Confirmation, CMS 2-4  
TCP/IP Interface, CMS 3-5  
Trace, CMS 4-21  
Trace Mode Options, CMS 4-21  
workstations  
processor placement, SOG 2-5  
Sun UltraSPARC, SOG 2-1  
workstations see Sun workstations  
X
Xerox Customer Documentation Catalog, IPG B-3  
Xerox Customer Education, IPG B-4, PRM 7-3  
Xerox Customer Parts and Product Support Center,  
IPG A-22, SOG A-23  
Xerox Customer Service Support Center, IPG B-1,  
PRM 7-1  
Xerox Documentation and Software Services  
(XDSS), IPG B-3, PRM 7-2  
Xerox Font Center, IPG B-4, PRM 7-2  
Xerox Printing Systems Customer Support Center,  
IPG B-2  
Xerox responsibilities, IPG 4-1IPG 4-2, IPG 8-2  
XSIS authorization, CMS 1-13  
CMS = Guide to Configuring and Managing the System  
IPG = Installation Planning Guide  
PRM = Guide to Performing Routine Maintenance  
SOG = System Overview Guide  
TRB = Troubleshooting Guide  
MASTER INDEX FOR MODEL 96/4635/180 IPS  
 
INDEX-13  
INDEX  
CMS = Guide to Configuring and Managing the System  
IPG = Installation Planning Guide  
PRM = Guide to Performing Routine Maintenance  
SOG = System Overview Guide  
TRB = Troubleshooting Guide  
INDEX-14  
MASTER INDEX FOR MODEL 96/4635/180 IPS  
 

Weed Eater Trimmer 530086743 User Manual
Weider Home Gym PRO 900 User Manual
Weil McLain Water Heater New Series 3 User Manual
Whirlpool Air Conditioner RH123A1 User Manual
Whirlpool Range WFG381LV User Manual
Williams Sound Stereo Receiver WIR SYS 90V User Manual
Wolf Appliance Company Range RT362F User Manual
Yamaha Electronic Keyboard KX25 User Manual
Zanussi Washer ZWS 5883 User Manual
Zephyr Ventilation Hood ADL E42ASX User Manual